2004 Bonnie - Silver Mistress
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: May 2005
Location: South Florida
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
2004 Bonnie - Silver Mistress
Well, I am getting closer to my goal with my car.
Silver Mistress
Nothing really to brag about on the exterior and interior yet, the greatness, in my opinion, is currently in the trunk.
Slowly, but surely, going to continue to make her better!!!
Going to my first SPL competition this weekend. Just to see how I am doing on SPL.
Hopeing to pull 120'* or higher.
-Greg
Silver Mistress
Nothing really to brag about on the exterior and interior yet, the greatness, in my opinion, is currently in the trunk.
Slowly, but surely, going to continue to make her better!!!
Going to my first SPL competition this weekend. Just to see how I am doing on SPL.
Hopeing to pull 120'* or higher.
-Greg
#6
Senior Member
True Car Nut
what did you do about wiring with a 2000+ how many watts (rms) are you pulling with thsoe amps?
I only ask becuase the alternator to bat wire on these cars is not very big, more importantly it has to run a LOOOOONG length
I only ask becuase the alternator to bat wire on these cars is not very big, more importantly it has to run a LOOOOONG length
#9
Member
Posts like a V-Tak
Thread Starter
Join Date: May 2005
Location: South Florida
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Thank you for comps
Thanks for the compliments guys.
The box and rack are custom, and I am thinking of puting a duplicate in on the opposite side with a 501X RF amp, to power interiors, and a RF 25 Amp Capacitor.
As far as the Batery question and Alternator. I didn't touch the stock wire connecting them. And so far has not been an issue. Maybe with added amp, in near future, I might have to look into upgrading that. Thanks for the concern.
I am not sure of what the actual draw on these amps are, I would have to look at the spec sheet to see that, but I will get back with you on that.
Thanks again!
The box and rack are custom, and I am thinking of puting a duplicate in on the opposite side with a 501X RF amp, to power interiors, and a RF 25 Amp Capacitor.
As far as the Batery question and Alternator. I didn't touch the stock wire connecting them. And so far has not been an issue. Maybe with added amp, in near future, I might have to look into upgrading that. Thanks for the concern.
I am not sure of what the actual draw on these amps are, I would have to look at the spec sheet to see that, but I will get back with you on that.
Thanks again!
Thread
Thread Starter
Forum
Replies
Last Post
red bonnie
Your Ride: GM Pictures & Videos
1
05-05-2008 10:19 PM
PRD2BDF
Detailing & Appearance
56
12-24-2005 05:08 PM