fiero trans problems
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Nov 2003
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
![sc3800fiero is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
My old 4t60e died , so bought another for salvage yard suppose to have 4ok miles looks new but... well got it in and all but it acts like it is taking off in 3rd gear. once you get moving everything is fine except initial take off till you get to 20-30 mph new filter new fluid, SES light came on only code come up was 58 and 26 58 is pats I know it is there 26 is quad driver A and it has always been on... anyone have a problem like this?? if so what was cure?? another trans?? btw trans is a 94-95 i guess computer / engine is 93 from a bonneville ssei.
#3
Member
Posts like a V-Tak
Thread Starter
Join Date: Nov 2003
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
![sc3800fiero is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
http://www.zoom-tech.com/downloads/*...m/GM-4T60E.pdf
this is what i found i know this trans has to be newer, after post i tried driving car again found the pulg into trans undone . plugged it upop same thing,, tag on trans is 5bxw that diagram shows differant wiring,,,, would this possiable be my problem? if so how do i know if it is 3 or 4 sol. trans??
this is what i found i know this trans has to be newer, after post i tried driving car again found the pulg into trans undone . plugged it upop same thing,, tag on trans is 5bxw that diagram shows differant wiring,,,, would this possiable be my problem? if so how do i know if it is 3 or 4 sol. trans??
#6
Retired
![](https://www.gmforum.com/images/ranks/veteran_army.png)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Umm, according to my manual, F and G are for the temp sensor. A is solenoid A
B is Blue solenoid, C is PWM, D is TCC/VCC, E just ties into the previous sensors.
B is Blue solenoid, C is PWM, D is TCC/VCC, E just ties into the previous sensors.
__________________
Retired Administrator
Retired Administrator
#8
Member
Posts like a V-Tak
Thread Starter
Join Date: Nov 2003
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
![sc3800fiero is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
i found out mine is a 95 trans is it possiable to rewire this to work with the 93 pcm? I wired it best I could figure out but seems to have a trans temp sensor where my pcm is does not look for it , any issues there?
#9
Retired
![](https://www.gmforum.com/images/ranks/veteran_army.png)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Hey, see if this will help ya.
__________________
Retired Administrator
Retired Administrator
#10
Member
Posts like a V-Tak
Thread Starter
Join Date: Nov 2003
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
![sc3800fiero is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Awesome that was exactly what I needed... not sure if it runs right just yet..... i have an extra wire to TCC brake I have no place for and my throttle cable broke....
but thank you that reassures me that i do have it wired correctly
did you find them online ???
but thank you that reassures me that i do have it wired correctly
did you find them online ???