97 97 Bonneville rough idle after start then runs fine.
#11
FP Update
OK so I just went out there and here is the readings I am getting.
Car at Idle ~30psi with or without the regulator hose hocked up
Key on Engine Off- ~20 psi (No change with FP priming)
So when I shut the car off the FP climbs to ~40psi then drop back down to 20~psi. This is a slow process takes about 15 min.
I am confused.
Once again Thanks
Matt
Car at Idle ~30psi with or without the regulator hose hocked up
Key on Engine Off- ~20 psi (No change with FP priming)
So when I shut the car off the FP climbs to ~40psi then drop back down to 20~psi. This is a slow process takes about 15 min.
I am confused.
Once again Thanks
Matt
Thread
Thread Starter
Forum
Replies
Last Post
chevjerico
Oldsmobile
8
05-26-2013 11:07 PM
LittleHoov
Bonneville GXP/ Northstar Powered Cars
10
07-13-2007 01:12 PM
mark2112
1992-1999
33
01-26-2005 09:34 AM