Zilla's rebuild (exhaust mod revealed, gauges going in.....)
#421
DINOSAURUS BOOSTUS
Expert Gearhead
Didn't get that air mix fixed eh?
I'm aiming for no ticks or knocks. How long will you deal with the tick before considering changing something.
I'm aiming for no ticks or knocks. How long will you deal with the tick before considering changing something.
#422
Junior Member
Posts like a Ricer Type-R
Thread Starter
Bill, you used old lifters. I used CompCams lifters with a shorter pre-load. I'm not worried about lifter tick for now, especially when it goes away once warmed up.
Topic in General Chat on the airmix for the SLE.
Next up? Exhaust work. Need to repair the crack in the front manifold, get the wideband O2 bung welded in, and another super-secret magic exhaust change that a couple of you know about. It'll be here this afternoon via UPS.
Topic in General Chat on the airmix for the SLE.
Next up? Exhaust work. Need to repair the crack in the front manifold, get the wideband O2 bung welded in, and another super-secret magic exhaust change that a couple of you know about. It'll be here this afternoon via UPS.
#423
Senior Member
Certified GM nut
Join Date: Jul 2004
Location: New York City
Posts: 1,912
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by willwren
Bill, you used old lifters. I used CompCams lifters with a shorter pre-load. I'm not worried about lifter tick for now, especially when it goes away once warmed up.
Topic in General Chat on the airmix for the SLE.
Next up? Exhaust work. Need to repair the crack in the front manifold, get the wideband O2 bung welded in, and another super-secret magic exhaust change that a couple of you know about. It'll be here this afternoon via UPS.
Topic in General Chat on the airmix for the SLE.
Next up? Exhaust work. Need to repair the crack in the front manifold, get the wideband O2 bung welded in, and another super-secret magic exhaust change that a couple of you know about. It'll be here this afternoon via UPS.
Are you getting a 3" downpipe done?
#425
Senior Member
True Car Nut
Join Date: Dec 2005
Location: August 07 COTM....NEBF '06, CEBF '06 OHMM '06 ONBF '07 CEBF '07
Posts: 4,064
Likes: 0
Received 0 Likes
on
0 Posts
Fanastic job Bill!
At least this one stills run...
How can I get in the super-secret circle of trust?...
Keep up the good work, champ!
At least this one stills run...
How can I get in the super-secret circle of trust?...
Keep up the good work, champ!
#426
Junior Member
Posts like a Ricer Type-R
Thread Starter
My downpipe is 2.5" INSIDE diameter, very wide open considering what'* upstream (great flowing ported EM'* and high-flow downstream). I have another plan that will suffice for the flow, but it may also have to include cat replacement. On that note, this one was replaced (by me) 5 years ago, and I've played with my fueling alot. I'd bet I'm due already anyway.
#427
Junior Member
Posts like a Ricer Type-R
Thread Starter
Had a little exhaust work done today:
Jerry'* stockcar (yes, local NASCAR division):
On to my crossover pipe cracks:
And the rest of the work:
Got a couple new wiring harnesses to run into the cabin now. Going to be a bizzy weekend for the Zilla.
Jerry'* stockcar (yes, local NASCAR division):
On to my crossover pipe cracks:
And the rest of the work:
Got a couple new wiring harnesses to run into the cabin now. Going to be a bizzy weekend for the Zilla.
#428
Senior Member
Certified GM nut
Join Date: May 2005
Location: Wickliffe, Ohio
Posts: 2,155
Likes: 0
Received 0 Likes
on
0 Posts
Nice electric cutout Bill. I was thinking about doing that with my up coming exhaust work but I've decided against it for the time being due to the budget.
Ed
Ed
#429
Junior Member
Posts like a Ricer Type-R
Thread Starter
That wasn't in the budget until I got a small bonus at work. I'd actually purchased it first, after arguing with myself for a few days. The price was right, noodles and rice are cheap, got it, then the bonus came in. Good timing. Figured I could sell the Honda any time to offset it.
This is a full-blown QTP with controller. And a wideband O2 bung for the new gauge/sensor/software logging setup.
This is a full-blown QTP with controller. And a wideband O2 bung for the new gauge/sensor/software logging setup.