Zilla's rebuild (exhaust mod revealed, gauges going in.....)
#361
i think this is the same stuff
http://www.bonnevilleclub.com/forum/...ic.php?t=74148
i think he'* waiting until he has complete results on temp dissipation before telling anyone what it is...
http://www.bonnevilleclub.com/forum/...ic.php?t=74148
i think he'* waiting until he has complete results on temp dissipation before telling anyone what it is...
#365
Junior Member
Posts like a Ricer Type-R
Thread Starter
Key on in probably an hour.
ICM hooked up, MAP hooked up, FWI is in. Belts are on. Battery is in, only negative is disconnected. Winshield fluid reservior is in.
Working on patching in my charcoal canister. Harness will need to be extended later. Still need to put on the RF wheel and fill the oil and coolant. That'* really about all that'* left.
ICM hooked up, MAP hooked up, FWI is in. Belts are on. Battery is in, only negative is disconnected. Winshield fluid reservior is in.
Working on patching in my charcoal canister. Harness will need to be extended later. Still need to put on the RF wheel and fill the oil and coolant. That'* really about all that'* left.
#369
Junior Member
Posts like a Ricer Type-R
Thread Starter
Oil is in.
STB going on as soon as I get my hands clean. Then coolant and water. It will be rather fitting that the water will be delivered to the radiator from a one-gallon Dead Guy Ale jug.
After that, I'll hook up the negative, pull the ECM/Fuel pump fuse, ignition on, crank, and watch for oil pressure.