Yet another LSD thread; but different from the others...
#11
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Jan 2007
Location: San Diego, CA
Posts: 1,451
Likes: 0
Received 0 Likes
on
0 Posts
![agrazela is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Originally Posted by lash
If you do, I'm certainly interested in how it all turns out.
If I do buy the thing, I certainly intend to pull it apart for complete inspection first...
So, as usual, more questions to all...
Regarding removing the passenger side half axle to get to the diff...is there enough "play" in the tripot that I could yank the halfaxle out of the differential, without having to undo the axle-to-hub connection? Is there too much risk in damaging the tripot or CV joint to attempt this?
If I do have to undo the axle-to-hub connection, is it absolutely necessary to separate the ball joint to remove the half axle from the hub?
There will be three parts that may need replacing as far as I can tell: the axle seal, the differential cover seal (perhaps like a large o-ring?) and the circlip / snap ring that holds the diff to the output shaft...anyone know if any of those parts will be re-useable? If not, can anyone get part numbers for the differential seal and snap ring? (I could try to post a diagram if that would help)
Speaking of the snap ring holding the diff to the output shaft, the FSM says I need a special tool to "free" the ring...but in the line drawing that tool simply looks like a small, blunt chisel or large flatblade screwdriver to me...anyone know what I'm talking about? (Again, I could try to post diagram if that would help)
(EDIT: I think I found the diff seal at NAPA:
http://www.napaonline.com/masterpage...ension+Housing
though still interested in the snap ring p/n)
#13
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Jan 2007
Location: San Diego, CA
Posts: 1,451
Likes: 0
Received 0 Likes
on
0 Posts
![agrazela is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Originally Posted by 95naSTA
I remember reading that the Gen 1 was ok but the Gen 2 was the one that messed up a lot of peoples transmissions.
The Gen2 (came out in 2004?) did get alot of bad press for busting pinions (due to weak bronze sleeves/bushings holding the pinion in, or something like that).
#14
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Jan 2007
Location: San Diego, CA
Posts: 1,451
Likes: 0
Received 0 Likes
on
0 Posts
![agrazela is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
This project idea is officially dead. Been after the seller for more info and pics of the part for a week and a half now, with no response. Oh well, just have to spend the money elsewhere
![Laughing](https://www.gmforum.com/gm/images/smilies/icon_lol.gif)
#15
Senior Member
Posts like a Turbo
Join Date: Jul 2006
Location: Toronto
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
![bigerik is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Originally Posted by agrazela
This project idea is officially dead. Been after the seller for more info and pics of the part for a week and a half now, with no response. Oh well, just have to spend the money elsewhere ![Laughing](https://www.gmforum.com/gm/images/smilies/icon_lol.gif)
![Laughing](https://www.gmforum.com/gm/images/smilies/icon_lol.gif)
![Smile](https://www.gmforum.com/gm/images/smilies/smile.gif)
Disappointing tho. Was curious to see how it would work for you.
Thread
Thread Starter
Forum
Replies
Last Post
Epicpwn
General GM Chat
23
08-06-2010 03:53 PM
agrazela
Performance, Brainstorming & Tuning
0
01-22-2007 03:24 PM