yella terra on L36
#1
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Oct 2006
Location: montreal canada NEBF07 ONBF07
Posts: 987
Likes: 0
Received 0 Likes
on
0 Posts
yella terra on L36
im like to know if yella terra 1.84 roller rocker are ok for a stock L36 whit only intake and exhaust mod and if anyone had problem whit them on the long run
#2
Senior Member
Certified GM nut
Join Date: May 2005
Location: Wickliffe, Ohio
Posts: 2,155
Likes: 0
Received 0 Likes
on
0 Posts
Can't see any reasons how it would be bad to run them on your L36. In addition to your intake & exhaust mods they should work great. I would suggest some stronger valve springs with them.
Ed
Ed
#5
Senior Member
Posts like a Turbo
Join Date: Dec 2006
Location: NHRA Division 3
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
I got1.8 on mine and you can feelthe difference in your butt dyno. Stock springs work fine. I just check the seat pressure befor i installed th rockers.
#6
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Oct 2006
Location: montreal canada NEBF07 ONBF07
Posts: 987
Likes: 0
Received 0 Likes
on
0 Posts
what i really like to know if these rocker will be better than ER rocker .there about the same ratio i think but the ER are stock welded rockers
#7
Member
Posts like a V-Tak
Join Date: Jul 2006
Location: Huber Heights, OH
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
The point of the 1.84 ratio is to be able to retain the stock springs. From what I have read in the GP community is anyting more than the 1.8s arent worth the added cost and hastle and won't render any more noticalbe results.
Vinnie
Vinnie
#8
Senior Member
Certified GM nut
Join Date: May 2005
Location: Wickliffe, Ohio
Posts: 2,155
Likes: 0
Received 0 Likes
on
0 Posts
Anytime you increase lift or duration stronger springs is a good idea and cheap insurance. Also if your going to be spinning your motor faster to make the most out of the rockers the springs will help prevent against valve float.
Ed
Ed
Thread
Thread Starter
Forum
Replies
Last Post
J Wikoff
Performance, Brainstorming & Tuning
9
08-21-2005 08:52 PM