What's the largest exhaust you can fit on a 96-99?
#11
Senior Member
True Car Nut
Thread Starter
Join Date: Dec 2002
Location: Halifax, Canada 91SSE / 97SSEi
Posts: 5,857
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Foghorn
I have TOG headers into a 3" Carsound cat, 3" out into a 2.5" reducer then the resonator and lastly into a Dynomax Turbo muffler. From behind the cat to the back is the original mandrel bent 2.5" SS exhaust.
Cheers,
Cheers,
Thanks
#12
Gordy is here now!!!! (straight from Seattle WA)
Here is the scoop. I had 3" straight mandral bent pipe with the cat elimintaed and a high flow camaro magnaflow muffler. I noticed a small drop in low end torque, but it opened up nicely at higher speeds. As Jason stated though, I did have enough low end HP to lay some tracks (http://www.mnbonnevilleclub.com/misc//newtoy.mpg ). My recommendation is use a slightly smaller pipe and keep high flow components in it such as high flow cat and muffler. Anything bigger / more free flowing would be a waste IMO.
Here is the scoop. I had 3" straight mandral bent pipe with the cat elimintaed and a high flow camaro magnaflow muffler. I noticed a small drop in low end torque, but it opened up nicely at higher speeds. As Jason stated though, I did have enough low end HP to lay some tracks (http://www.mnbonnevilleclub.com/misc//newtoy.mpg ). My recommendation is use a slightly smaller pipe and keep high flow components in it such as high flow cat and muffler. Anything bigger / more free flowing would be a waste IMO.
#15
Senior Member
Certified Car Nut
Originally Posted by BonneMeMN
Originally Posted by willwren
And your point is? Gordy stated some time ago that he felt a loss of low-end.
#16
Senior Member
Certified GM nut
Join Date: Dec 2004
Location: Port Charlotte FLORIDA
Posts: 2,077
Likes: 0
Received 0 Likes
on
0 Posts
just remeber with a grinder and a welder you can put anything you want to on your car!!!
now will it work correctly is a diff subject
now will it work correctly is a diff subject
Thread
Thread Starter
Forum
Replies
Last Post
IronBear93SSEi
Performance, Brainstorming & Tuning
3
04-13-2007 08:46 PM