A Teaser
#11
The 95'* had the crazy hybrid PCM'*. Might be tricky to find a chip for it. What about the guy that does them for Fiero'*. I remember seeing a link for that, you might want to contact him to see what could be done.
#13
That site is freaking awesome!
$35 to burn a chip??!!!!
Once i get everything installed and have my car scanned to see whats goin on, I'll definatley be hittin that place up.
Geeze 35 bucks.
Amazing.
Thanks.
#14
I'd get that full PCM for the 94/95 bonneville if i were you. Might be a little more, but it'* more then a memcal.
Yeah it'* amazing what one guy with a prom reader etc can do for prices. He'll do whatever you want too lol.
Yeah it'* amazing what one guy with a prom reader etc can do for prices. He'll do whatever you want too lol.
#15
Senior Member
True Car Nut
Joined: Jan 2003
Posts: 3,734
Likes: 0
From: Bloomington-Normal, IL 1997 SE
the only problem is you have to know EXACTLY what you want, you could easily screw it up with the wrong parameters. Guess and check is a little out of the question.
#16
Heres some more pics of what i've been up to..
Port matched upperintake:
New ZZP stainless intake valves:
Spare Heads:
The GT Cam:
And my friend dan............. :
I Just ported the upperintake last night b/c it'* alumnium and i was able to do it w/ a drill. I still have to get a grinder that can go up to 20,000 rpms to to the cast iron heads.
Port matched upperintake:
New ZZP stainless intake valves:
Spare Heads:
The GT Cam:
And my friend dan............. :
I Just ported the upperintake last night b/c it'* alumnium and i was able to do it w/ a drill. I still have to get a grinder that can go up to 20,000 rpms to to the cast iron heads.
#17
Top end build up update
I just re ordered some stuff from my build up.
- Felpro headbolts
- Felpro exaust manifold gaskets
- (intense) Cometic MLS Head Gaskets .052"
- Hylomar gasket dressing
- LS6 springs from gmparts direct ($70.70!!!!)
I'm not so sure about milling the heads anymore. I think the MLS gaskets are enough but then agian i don't want to be kicking myself in the as later for not doing it. One reason i don't really want to anymore is b/c when i mill the heads, i think it would be throwing off the alignment of the intake ports.
Anyway i almost have everything i need to do the installs. I just need to port my heads and hopefully can do that this weekend.
- Felpro headbolts
- Felpro exaust manifold gaskets
- (intense) Cometic MLS Head Gaskets .052"
- Hylomar gasket dressing
- LS6 springs from gmparts direct ($70.70!!!!)
I'm not so sure about milling the heads anymore. I think the MLS gaskets are enough but then agian i don't want to be kicking myself in the as later for not doing it. One reason i don't really want to anymore is b/c when i mill the heads, i think it would be throwing off the alignment of the intake ports.
Anyway i almost have everything i need to do the installs. I just need to port my heads and hopefully can do that this weekend.
Thread
Thread Starter
Forum
Replies
Last Post