shortening the l27 intake runners
#1
Senior Member
True Car Nut
Thread Starter
shortening the l27 intake runners
I was thinking about this question today and was wondering if this would work..
Originally Posted by 95naSTA
Well, after looking at the UIM you may be able to shorten the runner length by porting the intake ports in the UIM. If you ovalize the ports, so that they extend longer down the runner, you will make a shorter path from the plenum to the valve.
The intake port opening will be larger but as long as you are able to make everthing smooth agian, I doubt there will be any loss in flow. It may actually help ramp up velocity..
I'm not really sure what it looks like in the plenum but maybe that is an option?
The intake port opening will be larger but as long as you are able to make everthing smooth agian, I doubt there will be any loss in flow. It may actually help ramp up velocity..
I'm not really sure what it looks like in the plenum but maybe that is an option?
Thread
Thread Starter
Forum
Replies
Last Post
PortugalFocus
Performance, Brainstorming & Tuning
2
03-08-2008 02:54 PM
95naSTA
Performance, Brainstorming & Tuning
9
09-29-2005 02:34 PM