Rear disc conversion 92-99
#13
Senior Member
Posts like a Corvette
Join Date: Jan 2002
Location: Cali
Posts: 1,587
Likes: 0
Received 0 Likes
on
0 Posts
Ill start fresh.
I was told we (Gm) are usually set at an 80-20 split to avoid the rear coming around. This means our front rotors are under ALOT of load.
A slightly more even split would keep the rear end from spinning around and offer a little relief for the front rotors. Probably just enough to make them last longer. This will also give more of the stopping job to the rear making the car stop faster with a better squatting affect while on the binders.
I would not suggest anyone do this themselves. Get a pro to do it.
Once again just my 2 cents.
Ty
I was told we (Gm) are usually set at an 80-20 split to avoid the rear coming around. This means our front rotors are under ALOT of load.
A slightly more even split would keep the rear end from spinning around and offer a little relief for the front rotors. Probably just enough to make them last longer. This will also give more of the stopping job to the rear making the car stop faster with a better squatting affect while on the binders.
I would not suggest anyone do this themselves. Get a pro to do it.
Once again just my 2 cents.
Ty
#15
Guest
Posts: n/a
Originally Posted by speedyguy
Ill start fresh.
I was told we (Gm) are usually set at an 80-20 split to avoid the rear coming around. This means our front rotors are under ALOT of load.
A slightly more even split would keep the rear end from spinning around and offer a little relief for the front rotors. Probably just enough to make them last longer. This will also give more of the stopping job to the rear making the car stop faster with a better squatting affect while on the binders.
I would not suggest anyone do this themselves. Get a pro to do it.
Once again just my 2 cents.
Ty
I was told we (Gm) are usually set at an 80-20 split to avoid the rear coming around. This means our front rotors are under ALOT of load.
A slightly more even split would keep the rear end from spinning around and offer a little relief for the front rotors. Probably just enough to make them last longer. This will also give more of the stopping job to the rear making the car stop faster with a better squatting affect while on the binders.
I would not suggest anyone do this themselves. Get a pro to do it.
Once again just my 2 cents.
Ty
#16
Senior Member
Posts like a Corvette
Join Date: Jan 2002
Location: Cali
Posts: 1,587
Likes: 0
Received 0 Likes
on
0 Posts
http://www.wilwood.com/products/valves/valves.asp
This is the product we will offer but I am sure the willwood site will suggest a site to buy from. If they don’t let me know and I can set you up.
Ty
This is the product we will offer but I am sure the willwood site will suggest a site to buy from. If they don’t let me know and I can set you up.
Ty
#17
Senior Member
Posts like a Corvette
Join Date: Jan 2002
Location: Cali
Posts: 1,587
Likes: 0
Received 0 Likes
on
0 Posts
The argument against proportioning valves. You decide what you want to do.
http://www.geocities.com/MotorCity/2...propvalve.html
LOL
My reason for suggesting the proportioning valves is to compensate for our poor rear adjustment system that walks off and causes reduced use of the rear brakes. A valve under the hood is easier to reach. AND DANGEROUS! Ask any shop teacher and I am sure he will be glad to educate you in the matter.
Ty
http://www.geocities.com/MotorCity/2...propvalve.html
LOL
My reason for suggesting the proportioning valves is to compensate for our poor rear adjustment system that walks off and causes reduced use of the rear brakes. A valve under the hood is easier to reach. AND DANGEROUS! Ask any shop teacher and I am sure he will be glad to educate you in the matter.
Ty
#18
Senior Member
Posts like a Corvette
Join Date: Jan 2002
Location: Cali
Posts: 1,587
Likes: 0
Received 0 Likes
on
0 Posts
More information
http://realbig.com/detomaso/1999-12/543.html
http://www.chevyhiperformance.com/techarticles/71398/
Some pictures and more info
I hope this all helps you decide what you want to do.
Ty
http://realbig.com/detomaso/1999-12/543.html
http://www.chevyhiperformance.com/techarticles/71398/
Some pictures and more info
I hope this all helps you decide what you want to do.
Ty
#20
Senior Member
Posts like a Corvette
Join Date: Jan 2002
Location: Cali
Posts: 1,587
Likes: 0
Received 0 Likes
on
0 Posts
42-50.00 depending on who you go to.
Just a note
By lowering the vehicle and using stiffer springs (DP 1/4 mile set up) it will lessen rear end swing quite a bit.
Ty
Just a note
By lowering the vehicle and using stiffer springs (DP 1/4 mile set up) it will lessen rear end swing quite a bit.
Ty