Ran the Caminated2K on Sunday...
#11
Senior Member
True Car Nut
Join Date: Jul 2003
Location: Westerville, Ohio 2000 Black SSEi
Posts: 6,127
Likes: 0
Received 1 Like
on
1 Post
The Bonneville is always in performance mode. The PCM does have two sets of tables however and I suppose it MAY be possible to use a switch to kick it into the other calmer table. Its the reverse of the GPs where when they press the button it kicks em into performance mode. For us, it should kick down into neutered mode.
#12
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Jun 2004
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
I reread the site and saw that, and I suppose that'* cool with me
Taylor, I had my dual 12"* with amp in the trunk yet too :P Stock thermostat, everything cept the pulley/cam/headers. Starting to see knock now on the 3.25 at the top so time to drop in a 180.. maybe a 160 .
Thanks for the info rogue Cya at nationals!
Taylor, I had my dual 12"* with amp in the trunk yet too :P Stock thermostat, everything cept the pulley/cam/headers. Starting to see knock now on the 3.25 at the top so time to drop in a 180.. maybe a 160 .
Thanks for the info rogue Cya at nationals!
#13
Senior Member
True Car Nut
Join Date: Jan 2003
Location: Bloomington-Normal, IL 1997 SE
Posts: 3,734
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by caminated2k
I reread the site and saw that, and I suppose that'* cool with me
Taylor, I had my dual 12"* with amp in the trunk yet too :P Stock thermostat, everything cept the pulley/cam/headers. Starting to see knock now on the 3.25 at the top so time to drop in a 180.. maybe a 160 .
Thanks for the info rogue Cya at nationals!
Taylor, I had my dual 12"* with amp in the trunk yet too :P Stock thermostat, everything cept the pulley/cam/headers. Starting to see knock now on the 3.25 at the top so time to drop in a 180.. maybe a 160 .
Thanks for the info rogue Cya at nationals!
#14
Senior Member
True Car Nut
Join Date: Jul 2003
Location: Westerville, Ohio 2000 Black SSEi
Posts: 6,127
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by macho_mike21
Originally Posted by caminated2k
I reread the site and saw that, and I suppose that'* cool with me
Taylor, I had my dual 12"* with amp in the trunk yet too :P Stock thermostat, everything cept the pulley/cam/headers. Starting to see knock now on the 3.25 at the top so time to drop in a 180.. maybe a 160 .
Thanks for the info rogue Cya at nationals!
Taylor, I had my dual 12"* with amp in the trunk yet too :P Stock thermostat, everything cept the pulley/cam/headers. Starting to see knock now on the 3.25 at the top so time to drop in a 180.. maybe a 160 .
Thanks for the info rogue Cya at nationals!
#15
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Jun 2004
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
Asume everything is stock on my motor unless I list it:
3.25 pulley
VS camshaft
SLP headers
NO CAT
Autolite 103'* at .057 gap
my new $8.36 CAI *open cone for track times*
I had my sub box in the car. Stock TB/TSTAT/SC etc.
3.25 pulley
VS camshaft
SLP headers
NO CAT
Autolite 103'* at .057 gap
my new $8.36 CAI *open cone for track times*
I had my sub box in the car. Stock TB/TSTAT/SC etc.
#16
Senior Member
True Car Nut
Join Date: Jul 2003
Location: Westerville, Ohio 2000 Black SSEi
Posts: 6,127
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by caminated2k
Asume everything is stock on my motor unless I list it:
3.25 pulley
VS camshaft
SLP headers
NO CAT
Autolite 103'* at .057 gap
my new $8.36 CAI *open cone for track times*
I had my sub box in the car. Stock TB/TSTAT/SC etc.
3.25 pulley
VS camshaft
SLP headers
NO CAT
Autolite 103'* at .057 gap
my new $8.36 CAI *open cone for track times*
I had my sub box in the car. Stock TB/TSTAT/SC etc.
#17
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Jun 2004
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
Who told you that Rogue???
Yes, I will beef it up. Shifting at 5400 i saw no purpose as of yet, however, they were brand new stock springs that now have about 5,000 miles on them.
Comp 105'* are in my future
Yes, I will beef it up. Shifting at 5400 i saw no purpose as of yet, however, they were brand new stock springs that now have about 5,000 miles on them.
Comp 105'* are in my future
#18
Senior Member
True Car Nut
Join Date: Jul 2003
Location: Westerville, Ohio 2000 Black SSEi
Posts: 6,127
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by caminated2k
Who told you that Rogue???
Yes, I will beef it up. Shifting at 5400 i saw no purpose as of yet, however, they were brand new stock springs that now have about 5,000 miles on them.
Comp 105'* are in my future
Yes, I will beef it up. Shifting at 5400 i saw no purpose as of yet, however, they were brand new stock springs that now have about 5,000 miles on them.
Comp 105'* are in my future
For those who don't know...
I hadvalve float with the 1.9'* at about 5900 rpm. Put in the 105'* with OR rods and titaniums retainers and it vanished. Now with the rollmaster timing chain my valvetrain should handle up to 7grand easy. I currently shift about 6300-6400 with no problems.
#19
Senior Member
Certified GM nut
Join Date: Jul 2003
Location: Chicagoland
Posts: 1,712
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Rogue
...Now with the rollmaster timing chain my valvetrain should handle up to 7grand easy. I currently shift about 6300-6400 with no problems.
caminated2k-what kinda stereo you got? That'* pretty cool that you ran those times with those mods. Whats with the Intense certified installer part of your sig? just curious.
#20
Senior Member
True Car Nut
Join Date: Jul 2003
Location: Westerville, Ohio 2000 Black SSEi
Posts: 6,127
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by TaylorD
Originally Posted by Rogue
...Now with the rollmaster timing chain my valvetrain should handle up to 7grand easy. I currently shift about 6300-6400 with no problems.
caminated2k-what kinda stereo you got? That'* pretty cool that you ran those times with those mods. Whats with the Intense certified installer part of your sig? just curious.