performance upgrades
#21
Senior Member
True Car Nut
Joined: Jan 2006
Posts: 8,029
Likes: 0
From: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Originally Posted by 95riviera
i can only find ngk tr55gp. where can i get just tr55 plugs
#23
Senior Member
True Car Nut
Joined: Jan 2006
Posts: 8,029
Likes: 0
From: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
well low comes on a little over 200... then high speed (the only one that does anything) comes on at like 220 something...
so yes, a High Speed fan over ride would help heat and a 180* stat is good also.
im not sure on how to do the high speed fan over ride on your car but i bet its not much diffrent then a bonnie.
Just find the ground Turn on wire that goes to the high speed fan relay under the hood and put a switch to it to ground it when ever you want...
so yes, a High Speed fan over ride would help heat and a 180* stat is good also.
im not sure on how to do the high speed fan over ride on your car but i bet its not much diffrent then a bonnie.
Just find the ground Turn on wire that goes to the high speed fan relay under the hood and put a switch to it to ground it when ever you want...
#28
what cam or rockers would be best to install on my riv. after i get my scanner and scan for KR then remove any that i have. i have seen some on
http://www.seriesoneperformance.com/valvetrain.html i plan on porting intake and heads soon.probably when i change cam .
is there anywhere els to get series 1 aftermarket parts
http://www.seriesoneperformance.com/valvetrain.html i plan on porting intake and heads soon.probably when i change cam .
is there anywhere els to get series 1 aftermarket parts
#29
Click on the Links link at the top of the page. There'* a very good reason or 5 that seriesoneperformance isn't listed there, and is no longer a recognized vendor here.
Before jumping into porting heads and such, I'd suggest alot more research and a good look at your budget, potential downtime for modding, etc.
You can get a cam from crowcams in australia, or have a custom grind done by CC or Crane. I suggest a north-american custom grind.
Rockers can be purchased from ZZP.
Before jumping into porting heads and such, I'd suggest alot more research and a good look at your budget, potential downtime for modding, etc.
You can get a cam from crowcams in australia, or have a custom grind done by CC or Crane. I suggest a north-american custom grind.
Rockers can be purchased from ZZP.
#30
i cant seem to find any imformation on what size cam i can run. will this one work from ZZP
The 216/230 .507/.507 grind w/ 112LSA.
and will any parts from the series 2-3 engines interchange?
The 216/230 .507/.507 grind w/ 112LSA.
and will any parts from the series 2-3 engines interchange?