Need some advice on some readings from my car.
08-01-2006, 06:14 PM
#12
Senior Member
Posts like a Corvette
Join Date: Jul 2004
Location: Bolingbrook, IL Location: Clarkston, MI
Posts: 1,256
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need some advice on some readings from my car.
Originally Posted by OLDsman105
readings from my riviera with a 2.4 pulley FWI. Hi-flow cat. and 2 1992 parkavenue injectors replaced under duress (spelling) (inside joke)
Mat: 288 degrees
BLM: 137
Int: 128
Adv : 13 degrees
KR :2 degrees
this is at WOT.
Mat: 288 degrees
BLM: 137
Int: 128
Adv : 13 degrees
KR :2 degrees
this is at WOT.
BLM'* of 137? Your running really lean. What are your 02'* at WOT?
Judging by how high your BLM'* are and your INTs at 128 I can tell that your PCM has learned that you need more fuel and basically is finished learning how much fuel it needs.
I think you need a bigger pulley.
08-01-2006, 06:20 PM
#13
Junior Member
Posts like a Ricer Type-R
Or to check the fuel pressure. That'* becoming a typical problem on the 92-95 L67'* with age now. It'* best to replace the pump and regulator at the same time if you don't meet spec.
You need at LEAST 41 psi at idle to run a smaller pulley.
You need at LEAST 41 psi at idle to run a smaller pulley.
Thread
Thread Starter
Forum
Replies
Last Post
Derek_64
1992-1999
2
11-29-2005 03:51 PM