Muffler mounting ideas
#1
Senior Member
Certified GM nut
Thread Starter
Join Date: Jun 2004
Posts: 1,933
Likes: 0
Received 0 Likes
on
0 Posts
Muffler mounting ideas
Well I ordered my Flowmaster 80 today. I'm going to have to cut the pipe to take the old muffler off (the original one). I'll need an enlarger to go from the 2" pipe to the 2.5" inlet on the Flowmaster. I'll have to find something to bolt to for the hanger to support the tail pipes. Does anyone have a good pic of this or know where to bolt to? I'm going to use the stock hanger to support the pipe before the muffler.
#4
Senior Member
Certified GM nut
Thread Starter
Join Date: Jun 2004
Posts: 1,933
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 95naSTA
Your stock pipe is either 2.25 or 2.5"
Mine was 2.25"
Mine was 2.25"
So if I can continue being stupid.... It'* a 2.5ID inlet on the flowmaster so I need a 2.25OD to 2.5OD to do it, right?
#6
#8
Originally Posted by 95seand78z28
Haro, those pics are awesome! Why did you overlap the pipes? The muffler hangs down a bit aren't you likley to get it caught on something?