intense shift kit install
#1
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: Dec 2007
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
intense shift kit install
i couldn't find to much on it,
im looking to do this myself with my buddy Syed, i just need some instructions, is there any site or printout anyone has that i could use? the more detail the better.
the kit came with instructions, but there to vague to know exactly what I'm doing, and i don't wanna screw anything up :P
feedback is greatly appreciated
im looking to do this myself with my buddy Syed, i just need some instructions, is there any site or printout anyone has that i could use? the more detail the better.
the kit came with instructions, but there to vague to know exactly what I'm doing, and i don't wanna screw anything up :P
feedback is greatly appreciated
#2
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 29 Likes
on
25 Posts
Re: intense shift kit install
Originally Posted by MadMike
i couldn't find to much on it,
im looking to do this myself with my buddy Syed, i just need some instructions, is there any site or printout anyone has that i could use? the more detail the better.
the kit came with instructions, but there to vague to know exactly what I'm doing, and i don't wanna screw anything up :P
feedback is greatly appreciated
im looking to do this myself with my buddy Syed, i just need some instructions, is there any site or printout anyone has that i could use? the more detail the better.
the kit came with instructions, but there to vague to know exactly what I'm doing, and i don't wanna screw anything up :P
feedback is greatly appreciated
#4
Senior Member
True Car Nut
Join Date: Sep 2002
Location: Genoa, Illinois
Posts: 4,013
Likes: 0
Received 0 Likes
on
0 Posts
Everyone says the instructions that come with the Intense kit are clear, but haro and myself agree that it was vague and required some guesswork. Best I can suggest is have a dremel tool nearby with various bits for minor adjustments.
I can't remember which piston it was, but the springs appear to fit in a way where they would seem to get all tangled and just cause some radically hard shifts but its normal.
Finally, the sandpaper they provide is key, but you may want to use some smaller grit because I only got 1 sheet that seemed a bit too harsh for the prep work. Take your time.
I can't remember which piston it was, but the springs appear to fit in a way where they would seem to get all tangled and just cause some radically hard shifts but its normal.
Finally, the sandpaper they provide is key, but you may want to use some smaller grit because I only got 1 sheet that seemed a bit too harsh for the prep work. Take your time.
#6
Senior Member
Posts like a Camaro
Join Date: Jan 2004
Location: Aurora, Illinois
Posts: 922
Likes: 0
Received 0 Likes
on
0 Posts
I've got my instructions still and have done this install before on my car. It just takes some time and patience to make sure you read everything right. When are you trying to do this?
#7
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: Dec 2007
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
i wanna do it asap
i have a feeling my trans might fail within the next month tho
its a rebuild, and im not sure the parts they used were in very good condition : /
im going to the shop tmrw to check and get a straight answer, if somethings wrong theyll replace it for free, so i guess its ok..
but ya, shift kit is a deff want on the list, since headers, dp, and exhaust are going in in a few days
and im workin on gettin my pcm from zzp
i have a feeling my trans might fail within the next month tho
its a rebuild, and im not sure the parts they used were in very good condition : /
im going to the shop tmrw to check and get a straight answer, if somethings wrong theyll replace it for free, so i guess its ok..
but ya, shift kit is a deff want on the list, since headers, dp, and exhaust are going in in a few days
and im workin on gettin my pcm from zzp
Thread
Thread Starter
Forum
Replies
Last Post
Hans
Performance, Brainstorming & Tuning
19
10-31-2007 11:37 AM
karldergrosse
Performance, Brainstorming & Tuning
3
03-15-2007 12:18 AM
PRD2BDF
Performance, Brainstorming & Tuning
16
02-18-2006 07:40 PM