Intake option (Rice Pipe) Read entire thread b4 asking q?
#41
Senior Member
Posts like a Supercharger
Join Date: Mar 2004
Location: Nanaimo BC
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
yeah I knew where the MAF was ... and I found the IAT it was in the bottom of the airbox
my MAF is seperate from the TB.... ... that little metal pipe comming off the intake(into side of valve cover)... between the MAF and the TB in that convoluted rubber chunk of intake pipe, looks to be like was mentioned ... the PCV "unit" I dunno where the valve is in it...
a pic of my motor is on page 2 of this thread...
my MAF is seperate from the TB.... ... that little metal pipe comming off the intake(into side of valve cover)... between the MAF and the TB in that convoluted rubber chunk of intake pipe, looks to be like was mentioned ... the PCV "unit" I dunno where the valve is in it...
a pic of my motor is on page 2 of this thread...
#42
Junior Member
Posts like a Ricer Type-R
Join Date: Sep 2003
Location: Minneapolis, MN
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
So has anyone tried leaving the rubber insert on to see if it improves airflow as a velocity stack?
Might try that when I install it this weekend.
Also, what'* the best way to cut this down to size?
Thanks,
-=Mandible=-
Might try that when I install it this weekend.
Also, what'* the best way to cut this down to size?
Thanks,
-=Mandible=-
#43
Senior Member
Certified Car Nut
Thread Starter
A power tool like an angle grinder or dremel would be the easiest to cut with, then maybe a sawzall, then a hacksaw.
I may try the velocity stack idea if i remember it tomorrow lol..
I may try the velocity stack idea if i remember it tomorrow lol..
#44
Senior Member
True Car Nut
Join Date: Apr 2004
Location: Three Oaks, Michigan
Posts: 4,879
Likes: 0
Received 3 Likes
on
3 Posts
what about this:
http://cgi.ebay.com/ebaymotors/ws/eB...category=38634
Use it with the crappy filter until my bonne is on the road again, then replace it with the K&N model you specified [i'm too lazy to read up].
I know it isn't for my '89, but the water bottles arn't there on mine, they are on the other side, and the only thing on the drivers side that could get in the way is the relay grouping. I know one member relocated it to the fender, which if it gives it a cleaner look, I may do that also.
-justin
http://cgi.ebay.com/ebaymotors/ws/eB...category=38634
Use it with the crappy filter until my bonne is on the road again, then replace it with the K&N model you specified [i'm too lazy to read up].
I know it isn't for my '89, but the water bottles arn't there on mine, they are on the other side, and the only thing on the drivers side that could get in the way is the relay grouping. I know one member relocated it to the fender, which if it gives it a cleaner look, I may do that also.
-justin
#46
Senior Member
Certified Car Nut
Thread Starter
Originally Posted by JLAudioEclipse
Jason why didn't your engine bay look like that at bonnefest???
#47
Junior Member
Join Date: Jul 2004
Location: washington state
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
very nice write up, i'm also mondering what models got the dual/'single washer bottles. my 92 ssei has the dual and i'd like to make more room for the cai. also any recommendation on what K&N filter to use.