I solved my problem!
#1
Senior Member
True Car Nut
Thread Starter
I solved my problem!
Remember? getting hot and pulling a butt load of timing after cam+ install?
Well i kinda fixed it.
I unplugged my O2 sensor so that it wouldn't be able to lean out the mixture. Then i Strapped on the AFC2.0 and increased values 1thru11 to 101% ans 12-13 102%.
I've been driving around all week with no problems and it'* fast as hell.
So what do ya think? besides i'm ghetto?
Well i kinda fixed it.
I unplugged my O2 sensor so that it wouldn't be able to lean out the mixture. Then i Strapped on the AFC2.0 and increased values 1thru11 to 101% ans 12-13 102%.
I've been driving around all week with no problems and it'* fast as hell.
So what do ya think? besides i'm ghetto?
#2
Junior Member
Posts like a Ricer Type-R
Fix the O2 problem. The AFC isn't a bandaid. It was designed to go with a working support system.
Basic rule applies. Mods shouldn't be applied to fix existing problems. It'll bite you in the end.
Basic rule applies. Mods shouldn't be applied to fix existing problems. It'll bite you in the end.
Thread
Thread Starter
Forum
Replies
Last Post
xxxkrazy4surxxx
1992-1999
6
11-23-2004 07:41 PM