I BLEW IT!!!!!!!
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: May 2006
Location: kalona, ia
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
I BLEW IT!!!!!!!
Last wednesday i discovered the hard way that detonation is an extremely bad thing!!!!
I was driving down the highway when a honda civic of one of my friends comes flying up and passes me doing almost a hundred so i immediately floor it to catch him (i have raced him many times and won evertime) as i am catching up to him all of the sudden smoke pours out of my exhaust and i loose power instantly. Well a much longer story short i ended up taking a chunk out of one of my pistons. The plan is to bore it 40 over almost to a 4.0 liter and put teflon coated pistons in. Also plan to port and polish the intake, supercharger, heads, and put headers on. Estimated power when complete 340 HP and almost 370 lbs. feet of torque i am so excited i am doing all of the work myself except the boring i am a auto tech. at the local shop so if i have any problems i can always ask them. lol
I was driving down the highway when a honda civic of one of my friends comes flying up and passes me doing almost a hundred so i immediately floor it to catch him (i have raced him many times and won evertime) as i am catching up to him all of the sudden smoke pours out of my exhaust and i loose power instantly. Well a much longer story short i ended up taking a chunk out of one of my pistons. The plan is to bore it 40 over almost to a 4.0 liter and put teflon coated pistons in. Also plan to port and polish the intake, supercharger, heads, and put headers on. Estimated power when complete 340 HP and almost 370 lbs. feet of torque i am so excited i am doing all of the work myself except the boring i am a auto tech. at the local shop so if i have any problems i can always ask them. lol
#4
Member
Posts like a V-Tak
Thread Starter
Join Date: May 2006
Location: kalona, ia
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
But do you think that the mods i am making by putting the teflon pistons and porting and polishing will help with KR at all or is there more stuff that i should do while i have the engine apart?? and does anyone know where i can get an adjustable fuel pressure regulator????
#5
Junior Member
Posts like a Ricer Type-R
Originally Posted by derek072887
But do you think that the mods i am making by putting the teflon pistons and porting and polishing will help with KR at all or is there more stuff that i should do while i have the engine apart?? and does anyone know where i can get an adjustable fuel pressure regulator????
Porting and Polishing WHAT? Some will reduce KR, some will not. You need to be alot more specific. TB? LIM? EMs? ???
Moving to Performance and Brainstorming.
#7
Junior Member
Posts like a Ricer Type-R
Originally Posted by dbtk2
.040 over will not get you to 4.0 liters. It would equate to 3872cc'* if I multiplied right, which gives you a 3.9L.
I don't know who did your CC or power estimates, but the estimates are quite entertaining.
#8
Member
Posts like a V-Tak
Thread Starter
Join Date: May 2006
Location: kalona, ia
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
i plan on porting the supercharger, LIM, throttle body, and the exhaust manifolds (or get headers)
also would moly rings have any advantages for me in performance or to reduce KR i doubt it will help with KR.
also would moly rings have any advantages for me in performance or to reduce KR i doubt it will help with KR.
#9
Senior Member
Certified Car Nut
Originally Posted by derek072887
i plan on porting the supercharger, LIM, throttle body, and the exhaust manifolds (or get headers)
also would moly rings have any advantages for me in performance or to reduce KR i doubt it will help with KR.
also would moly rings have any advantages for me in performance or to reduce KR i doubt it will help with KR.
and you cannot get headers for the Series One
you mention that you have a 92, I sure hope you are planning to upgrade your valve train to a 93-95
i also hope there is plans for trans work too
and it second Willwren, that is quite a high bar to acheive with a S1 L67
#10
Member
Posts like a V-Tak
Thread Starter
Join Date: May 2006
Location: kalona, ia
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
i am wondering if MOLY rings would give me any advantages as far as KR is concerned i know they seal better but do they halp with anything else????