Header Install Advice....Headers are in...sorta
#41
Junior Member
Posts like a Ricer Type-R
I'm misunderstanding something. You said the 93 was harder than the 2k?
I'm talking about 30 minutes from a running engine to both manifolds on the shop floor. 92-95 S1 manifolds are a snap to pull and install.
I'm talking about 30 minutes from a running engine to both manifolds on the shop floor. 92-95 S1 manifolds are a snap to pull and install.
#42
DINOSAURUS BOOSTUS
Expert Gearhead
Glad to hear the suggestions helped. I thanked Pat'* Dad when I did mine. He supplied the tools and made the suggestion from years of dealership experience.
#43
Senior Member
True Car Nut
Thread Starter
took the first test drive..straight out of the y-pipe.....17.5* of timing up to 110mph with no KR.....with a 3.2".
Much faster though, I want to get it dyno'd with JUST headers+3.0 pulley+intake+PCM to see what gains can be had...I'm shooting for 240WHP and 300LB of Torque at the wheels with a good tune.
FYI these cars are a bit loud with no mufflers...
Much faster though, I want to get it dyno'd with JUST headers+3.0 pulley+intake+PCM to see what gains can be had...I'm shooting for 240WHP and 300LB of Torque at the wheels with a good tune.
FYI these cars are a bit loud with no mufflers...
#47
Senior Member
True Car Nut
Thread Starter
Headers are welded up...no leaks at all..using the stock y-pipe clamps.
It is quite a bit faster on the top end, but still needs some tuning to make it perfect.
It is quite a bit faster on the top end, but still needs some tuning to make it perfect.
#48
took the first test drive..straight out of the y-pipe.....17.5* of timing up to 110mph with no KR.....with a 3.2".
Much faster though, I want to get it dyno'd with JUST headers+3.0 pulley+intake+PCM to see what gains can be had...I'm shooting for 240WHP and 300LB of Torque at the wheels with a good tune.
FYI these cars are a bit loud with no mufflers...
Much faster though, I want to get it dyno'd with JUST headers+3.0 pulley+intake+PCM to see what gains can be had...I'm shooting for 240WHP and 300LB of Torque at the wheels with a good tune.
FYI these cars are a bit loud with no mufflers...
#49
Senior Member
Certified GM nut
Join Date: Jul 2004
Location: New York City
Posts: 1,912
Likes: 0
Received 0 Likes
on
0 Posts
Headers are welded up...no leaks at all..using the stock y-pipe clamps.
I am glad the headers a working great for you. Do you have any pics of the install?