Going to INTENSE RACING for install....
#1
Senior Member
Certified GM nut
Thread Starter
Join Date: Jul 2003
Location: Chicagoland
Posts: 1,712
Likes: 0
Received 0 Likes
on
0 Posts
Going to INTENSE RACING for install....
Well time for me to start getting serious so on my little family trip through Ohio, I'm stopping at intense for their 2nd gen LSD to be installed Friday March 26th. While I'm there going to bring home some gen 3 1.9 rockers and Oil restricted pushrods and new springs. Probably come home with few other things too.
Going to have Steve Hale from ILGCP install my rockers and some ceramic Togs for me when I get back along with a Hiflow cat. Also going to throw some MSD wires and probably 3 range colder plugs in. Considering getting a Stage 2 HVTB while I'm there too.
That should hold me over for a while. Now if Rouge can just figure out the hump on the 3.2 pulley problem, damn aggressive PCM. I've been talking with Charles Breyer from DHP and close to my house about getting a custom burn after everything is on. Than that 3.2 is going on. Planning on Dyno tunning the chip too.
Than Great Lakes Dragway here I come!
Going to have Steve Hale from ILGCP install my rockers and some ceramic Togs for me when I get back along with a Hiflow cat. Also going to throw some MSD wires and probably 3 range colder plugs in. Considering getting a Stage 2 HVTB while I'm there too.
That should hold me over for a while. Now if Rouge can just figure out the hump on the 3.2 pulley problem, damn aggressive PCM. I've been talking with Charles Breyer from DHP and close to my house about getting a custom burn after everything is on. Than that 3.2 is going on. Planning on Dyno tunning the chip too.
Than Great Lakes Dragway here I come!
#2
Senior Member
True Car Nut
That should be a pretty quick SSEi after you get that stuff done. I am thinking 14 flat or high 13'* easy.
Have you considered getting ZZP'* new "low cost" intercooler? They just released one for $499, and it is supposed to allow you to drop .2-.3 pulley size.
I just hope you have better luck with the Intense LSD than we have. We're on the 3rd one now.
Shawn
Have you considered getting ZZP'* new "low cost" intercooler? They just released one for $499, and it is supposed to allow you to drop .2-.3 pulley size.
I just hope you have better luck with the Intense LSD than we have. We're on the 3rd one now.
Shawn
#3
Senior Member
Certified GM nut
Thread Starter
Join Date: Jul 2003
Location: Chicagoland
Posts: 1,712
Likes: 0
Received 0 Likes
on
0 Posts
oh don't jinx me Shawn. I have faith in it. your first two were 1st gen right?
Well I'm hoping for 13'*, I asked for a helemt for my 23rd birthday which is THIS Firday! Also will use it for a future Motorcycle too.
Well I'm hoping for 13'*, I asked for a helemt for my 23rd birthday which is THIS Firday! Also will use it for a future Motorcycle too.
#5
Senior Member
True Car Nut
Originally Posted by TaylorD
oh don't jinx me Shawn. I have faith in it. your first two were 1st gen right?
Well I'm hoping for 13'*, I asked for a helemt for my 23rd birthday which is THIS Firday! Also will use it for a future Motorcycle too.
Well I'm hoping for 13'*, I asked for a helemt for my 23rd birthday which is THIS Firday! Also will use it for a future Motorcycle too.
The helmet is defiately a good idea. It would suck to hit 13'* and have to quit racing because you don't have a helmet. I can definately see you hitting 13'* in that beast. I want to see some videos of your runs too!
BTW...Happy Birthday.
Shawn
#7
Senior Member
Certified GM nut
Thread Starter
Join Date: Jul 2003
Location: Chicagoland
Posts: 1,712
Likes: 0
Received 0 Likes
on
0 Posts
Hey that would be cool Todd, I plan on shooting for Noon on Friday March 26th.
Think I want a Red Intense Sticker like your yellow one.
Think I want a Red Intense Sticker like your yellow one.