gen III build for land speed
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Aug 2010
Location: SC
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
gen III build for land speed
Hello all,
need input.
I want to build a 6.0 gen III cast iron motor for land speed racing.
It has to be carbureted
can anyone suggest a good cam / manifold / carb combo to run with the stock rotating assembly? lq4 probably...
in the end it will be broken down and built with forged rods/ pistons and eventually super charged. But for the September meet it will be a junk yard jewl with a carb.
Thanks
Fred
need input.
I want to build a 6.0 gen III cast iron motor for land speed racing.
It has to be carbureted
can anyone suggest a good cam / manifold / carb combo to run with the stock rotating assembly? lq4 probably...
in the end it will be broken down and built with forged rods/ pistons and eventually super charged. But for the September meet it will be a junk yard jewl with a carb.
Thanks
Fred
#4
Senior Member
True Car Nut
ive never built an ls but personally i would go with a tall single plane like this and a 750 to 850 holley 4150 carb. then call up summit or a cam co. and see what the biggest cam you can get away with w/stock heads. then you can sell those when you go to "stage two"
http://www.summitracing.com/parts/EDL-29087/
http://www.summitracing.com/parts/EDL-29087/
Thread
Thread Starter
Forum
Replies
Last Post
OLBlueEyesBonne
Forced Induction
20
10-13-2006 02:55 AM
chadow427
Performance, Brainstorming & Tuning
5
09-08-2005 12:30 AM