gauge install
#1
Junior Member
Thread Starter
Join Date: Oct 2006
Location: UpState N.y
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
gauge install
I Have a mec oil press , elec water temp gauge any help on easy instill and were to run wires and oil line w/o FIRE
Thank mrsnuke
also i would too list mod and pic hows the easiest way
Thanks mrsnuke
Thank mrsnuke
also i would too list mod and pic hows the easiest way
Thanks mrsnuke
#2
Senior Member
Certified Car Nut
I really wouldn't run the Mech oil gauge in the cabin if you don't have some aftermarket oiler/pressurizer etc, unless it'* a race only car (which i doubt it is, if you're asking this question).
#3
Junior Member
Thread Starter
Join Date: Oct 2006
Location: UpState N.y
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
oil press
no it a street car so get a elec oil press gauge insted of a mec ok now the easiest place for the wires too be ran through the carw/o drilling holes where do i get the gauge pod i see in your cars thank agaun mrsnuke
#4
Junior Member
Posts like a Ricer Type-R
You make the gauge pod yourself. You can get the universal pod to attach to your pillar trim from some auto parts stores.
You won't get that gauge wire through the firewall without drilling a hole. Why are you using an aftermarket gauge instead of the one you already have?
You won't get that gauge wire through the firewall without drilling a hole. Why are you using an aftermarket gauge instead of the one you already have?
#7
Senior Member
Certified Car Nut
Originally Posted by mrsnuke
holes where do i get the gauge pod i see in your cars thank agaun mrsnuke
http://www.bonnevilleclub.com/forum/...ght=pillar+pod
Originally Posted by elijahcronin
How do you go about moving the boost gauge to a diff. location, or hooking up something in its place. I want it to be down by my shift ****?
http://www.bonnevilleclub.com/forum/...e=article&k=47
the writer of this might even help ya....LMAO
Thread
Thread Starter
Forum
Replies
Last Post