finally
#1
Senior Member
True Car Nut
Thread Starter
finally
i got my MPS from intense a week ago and i love the power it gave me i also ordered plugs and t-stat and a 3.5 O/* idler at the same time
after i put everything on i did a quick scan at WOT i have between 1-2 degrees of KR which is awesome
im expereincing belt slip now but on at about 4800-5200 rpms i have a gatorback 715
i max out at about 10pds of boost
after i put everything on i did a quick scan at WOT i have between 1-2 degrees of KR which is awesome
im expereincing belt slip now but on at about 4800-5200 rpms i have a gatorback 715
i max out at about 10pds of boost
#3
DINOSAURUS BOOSTUS
Expert Gearhead
Mark...if you are getting belt slip on a 3.4...something is wrong. There are plenty of people here running it with a 715 belt and no oversized pully w/o any issue.
You may want to check your tensioner.
Congrats on the power up...
You may want to check your tensioner.
Congrats on the power up...
#4
Senior Member
True Car Nut
Thread Starter
Originally Posted by BillBoost37
Mark...if you are getting belt slip on a 3.4...something is wrong. There are plenty of people here running it with a 715 belt and no oversized pully w/o any issue.
You may want to check your tensioner.
Congrats on the power up...
You may want to check your tensioner.
Congrats on the power up...
#5
DINOSAURUS BOOSTUS
Expert Gearhead
Whle the belt is off..did you check bearings and coupler?
We have more than enough belt wrap and unless your belt is too long or greased down..I don't understand why it would slip.
We have more than enough belt wrap and unless your belt is too long or greased down..I don't understand why it would slip.
#6
Senior Member
True Car Nut
Thread Starter
Originally Posted by BillBoost37
Whle the belt is off..did you check bearings and coupler?
We have more than enough belt wrap and unless your belt is too long or greased down..I don't understand why it would slip.
We have more than enough belt wrap and unless your belt is too long or greased down..I don't understand why it would slip.
the car only has 51k on it so i doubt the coupler is the issue
#8
Senior Member
True Car Nut
Thread Starter
Originally Posted by Rogue
How are you determining it is belt slip? Rubber shavings all over the engine bay or watching the boost gauge go up and down?
#9
Senior Member
True Car Nut
Join Date: Jul 2003
Location: Westerville, Ohio 2000 Black SSEi
Posts: 6,127
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by GAMEOVER
Originally Posted by Rogue
How are you determining it is belt slip? Rubber shavings all over the engine bay or watching the boost gauge go up and down?
#10
Senior Member
Posts like a Corvette
Join Date: Aug 2004
Location: South Bend, IN (hometown) Indianapolis,IN (college)
Posts: 1,598
Likes: 0
Received 0 Likes
on
0 Posts
i doubt its belt slip. i know on 1337sseis car. the belt would rub after being reved. and we tried to do an oversized tensioner and stock belt. we had to change the belt and reinstall the stock tensioner. everything was fine after that.