FIGURE THIS ONE OUT
#1
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: May 2003
Location: Calgary, Canada
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
![bonnycrazy is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Ok , here'* the scoop . i took out my maf screen , my car started running sluggish(from 4000-5000 rpm only) so i thought i would put it back in and everything would go back to normal. WRONG
It'* still running the same , especially when the engine gets hot.
now, let me mind u i just installed new plugs(ngk irridium'*) new plug wires , new coils( accel'*) new o2 sensor( oem bosch) new oil change(mobile1 10w40), oil filter, pcv valve , fuel filter, air filter .i've been pumping premium fuel ever since i bought the car . the maf screen was not damaged.
any help would be appreciated.
thnx in advance.
Al
![Crying or Very sad](https://www.gmforum.com/gm/images/smilies/icon_cry.gif)
now, let me mind u i just installed new plugs(ngk irridium'*) new plug wires , new coils( accel'*) new o2 sensor( oem bosch) new oil change(mobile1 10w40), oil filter, pcv valve , fuel filter, air filter .i've been pumping premium fuel ever since i bought the car . the maf screen was not damaged.
any help would be appreciated.
![Laughing](https://www.gmforum.com/gm/images/smilies/icon_lol.gif)
thnx in advance.
Al
#2
Guest
Posts: n/a
![Default](https://www.gmforum.com/images/icons/icon1.gif)
ok , try this first, disconnect the bat. neg term. let the pcm power down, i would recommend like 30 mins if you can, it wont take that long to do it, but just in case of any other electronics on board that may reserve power. reconnect the bat. and start it. let it idle for 10 mins, then road test. this way the pcm will adjst itself to any new changes you have made. anytime you make a change, do this.
hope this helps you
hope this helps you
![Idea](https://www.gmforum.com/gm/images/smilies/icon_idea.gif)
#3
Guest
Posts: n/a
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Originally Posted by bonnycrazy
new o2 sensor( oem bosch)
#4
Senior Member
True Car Nut
Join Date: May 2002
Location: Edmonton, AB Canada
Posts: 2,621
Likes: 0
Received 0 Likes
on
0 Posts
![DeathRat is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Originally Posted by Burgundy_Boat
Originally Posted by bonnycrazy
new o2 sensor( oem bosch)
![Wink](https://www.gmforum.com/gm/images/smilies/icon_wink.gif)
I would check for a loose or damaged Vacuumn hose that may have fallen off or got knocked off or even knicked when you were changing one of the above components.
![Wink](https://www.gmforum.com/gm/images/smilies/icon_wink.gif)
#6
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: May 2003
Location: Calgary, Canada
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
![bonnycrazy is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
took the negative terminal off for about 15 mins , still got the problem , when my engine gets hot it starts cutting out between 4000-5000 rpm ( in all gears ). my ( service engine soon) light is on, so i had it scanned and they said that my computer was fryed??
any suggestions?
Thnx
Al
any suggestions?
Thnx
Al
#7
Guest
Posts: n/a
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Originally Posted by bonnycrazy
took the negative terminal off for about 15 mins , still got the problem , when my engine gets hot it starts cutting out between 4000-5000 rpm ( in all gears ). my ( service engine soon) light is on, so i had it scanned and they said that my computer was fryed??
any suggestions?
Thnx
Al
any suggestions?
Thnx
Al
![Crying or Very sad](https://www.gmforum.com/gm/images/smilies/icon_cry.gif)
#8
Guest
Posts: n/a
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Originally Posted by DeathRat
Originally Posted by Burgundy_Boat
Originally Posted by bonnycrazy
new o2 sensor( oem bosch)
![Wink](https://www.gmforum.com/gm/images/smilies/icon_wink.gif)
I would check for a loose or damaged Vacuumn hose that may have fallen off or got knocked off or even knicked when you were changing one of the above components.
![Wink](https://www.gmforum.com/gm/images/smilies/icon_wink.gif)
![Wink](https://www.gmforum.com/gm/images/smilies/icon_wink.gif)
#9
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: May 2003
Location: Calgary, Canada
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
![bonnycrazy is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Originally Posted by Burgundy_Boat
Originally Posted by bonnycrazy
took the negative terminal off for about 15 mins , still got the problem , when my engine gets hot it starts cutting out between 4000-5000 rpm ( in all gears ). my ( service engine soon) light is on, so i had it scanned and they said that my computer was fryed??
any suggestions?
Thnx
Al
any suggestions?
Thnx
Al
![Crying or Very sad](https://www.gmforum.com/gm/images/smilies/icon_cry.gif)
![Wink](https://www.gmforum.com/gm/images/smilies/icon_wink.gif)
anyways , i just popped in my new ''ECU'' , took it out for a rip. seems to be ok now but u can't really tell till the engine gets hot. but i think it should be ok . just slapped in my new intake too! it was off my old 95 civic . i just used a POS filter on it for now till i get my k&n . sounding good though . finally unleashed that nice whistling sound that was hiding there for nine years !!
anyways, i'll let u know happens tommorrow and thnx for all ur help guys
![Laughing](https://www.gmforum.com/gm/images/smilies/icon_lol.gif)
Al
#10
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: May 2003
Location: Calgary, Canada
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
![bonnycrazy is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Originally Posted by bonnycrazy
Originally Posted by Burgundy_Boat
Originally Posted by bonnycrazy
took the negative terminal off for about 15 mins , still got the problem , when my engine gets hot it starts cutting out between 4000-5000 rpm ( in all gears ). my ( service engine soon) light is on, so i had it scanned and they said that my computer was fryed??
any suggestions?
Thnx
Al
any suggestions?
Thnx
Al
![Crying or Very sad](https://www.gmforum.com/gm/images/smilies/icon_cry.gif)
![Wink](https://www.gmforum.com/gm/images/smilies/icon_wink.gif)
Al
![Shocked](https://www.gmforum.com/gm/images/smilies/icon_eek.gif)