Cold Air Intake (Need help purchasing/Installing)
#1
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Jun 2006
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
![Snuggles.bf is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Thanks for all you help with the exhaust advice but now im on the next bit. Im looking for a cold air intake to replace that piece of **** stock air filter. Thing is such a pain in the ***. So i was wondering if anyone can hook me up with a website to purchase from or a local store that can hook me up. Thanks again.
~Aaron
~Aaron
#2
Senior Member
Certified Car Nut
Join Date: Aug 2004
Location: My reclining computer chair
Posts: 11,269
Likes: 0
Received 0 Likes
on
0 Posts
![dbeast420 is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Your best bet would be to go to Autozone or your local parts house and look for the Spectre intake tube for the Honda Civic
Comes in a generic looking plastic case it'* around 35 bucks.
The next thing aould be the filter. www.ajusa.com for the K&N RX-4750.
Quite a few of us have this filter and it would probably be the best one for ya![Wink](https://www.gmforum.com/gm/images/smilies/wink.gif)
Coupler to the throttle body can be found here http://www.siliconeintakes.com/reducer.htm
You'll need the 3.75" to 3" reducer.
The best place for the IAT sensor is in the filter. You can either get the IAT harness from www.intense-racing.com. It'* this one..Casper'* Electronics IAT Harness Extender. Or,if you are handy with a soldering gun,just extend the IAT wires to reach the hole in the filte . Which happens to be the best location for it.
Fab up a heat shield and you're good to go
Comes in a generic looking plastic case it'* around 35 bucks.
The next thing aould be the filter. www.ajusa.com for the K&N RX-4750.
Quite a few of us have this filter and it would probably be the best one for ya
![Wink](https://www.gmforum.com/gm/images/smilies/wink.gif)
Coupler to the throttle body can be found here http://www.siliconeintakes.com/reducer.htm
You'll need the 3.75" to 3" reducer.
The best place for the IAT sensor is in the filter. You can either get the IAT harness from www.intense-racing.com. It'* this one..Casper'* Electronics IAT Harness Extender. Or,if you are handy with a soldering gun,just extend the IAT wires to reach the hole in the filte . Which happens to be the best location for it.
Fab up a heat shield and you're good to go
![Wink](https://www.gmforum.com/gm/images/smilies/wink.gif)
#4
Senior Member
Certified Car Nut
Join Date: Aug 2004
Location: My reclining computer chair
Posts: 11,269
Likes: 0
Received 0 Likes
on
0 Posts
![dbeast420 is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Originally Posted by Snuggles.bf
Thanks guy, found all the parts and putting in order.
![Wink](https://www.gmforum.com/gm/images/smilies/wink.gif)
spectre intake tube
#5
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Jun 2006
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
![Snuggles.bf is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Thanks for all your help i just put in the orders for each of these parts that i need. Tomorrow i'll go get the Honda Civic Spectre intake tube. You say i can get this at autozone or pep boys? Will there be anything else that i need for attatching this Intake?
~Aaron
~Aaron
#7
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Jun 2006
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
![Snuggles.bf is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Damn do you live on here? Lol do you have AIM? Mine is Crimsonbllood, i'd like to talk to you about other things i can do to this car if you wouldn't mind talking with me.
Thread
Thread Starter
Forum
Replies
Last Post
88bonnsse
Performance, Brainstorming & Tuning
25
10-16-2007 08:23 AM
95bonneSE
General GM Chat
23
12-30-2005 07:27 PM