Cheaper Wideband Option (JAW)
#1
Senior Member
True Car Nut
Thread Starter
Cheaper Wideband Option (JAW)
I've been running this wideband controller with the suggested Bosch sensor for the past few months and it works great:
http://www.14point7.com/JAW/JAW.htm
I chose the solder my own option with display and it wasn't too bad. It was more fun than anything else.
Some cool features are:
It can be calibrated
Data logging with extra inputs
Programmable outputs
-can be used to replace oem sensor, to hook up a n/b gauge, etc.
http://www.14point7.com/JAW/JAW.htm
I chose the solder my own option with display and it wasn't too bad. It was more fun than anything else.
Some cool features are:
It can be calibrated
Data logging with extra inputs
Programmable outputs
-can be used to replace oem sensor, to hook up a n/b gauge, etc.
#3
Senior Member
Posts like a Camaro
Join Date: Jan 2004
Location: Aurora, Illinois
Posts: 922
Likes: 0
Received 0 Likes
on
0 Posts
You just potentially saved me about 200 dollars. I'm getting a tuner in a couple of months and was going to get the AEM Uego unit. For my needs though this will work great!
#4
Senior Member
True Car Nut
Thread Starter
Originally Posted by agrazela
So wait a minute...this JAW thing allows you to calibrate and program the outputs on the sensor?
Originally Posted by Alan To
The outputs can do the following:
1- output to an analog gauge, you will need to figure the correct profile for the gauge to get it working.
2- outputing a narrow band signal to the ecu, this will allow your to run the WB sensor in place of the narrowband
3- output a linear 0-5 volt signal to an aftermarket fuel control computer like Megasquirt.
1- output to an analog gauge, you will need to figure the correct profile for the gauge to get it working.
2- outputing a narrow band signal to the ecu, this will allow your to run the WB sensor in place of the narrowband
3- output a linear 0-5 volt signal to an aftermarket fuel control computer like Megasquirt.
#5
Senior Member
Posts like a Corvette
Join Date: Jan 2007
Location: San Diego, CA
Posts: 1,451
Likes: 0
Received 0 Likes
on
0 Posts
Hmm, was reading the JAW docs and it only works with Micro$oft .NET framework 2.0
DHP PowrTuner only works with .NET 1.1
Once you prog the sensor, is it standalone? That is, could you program the sensor on one computer and log it with PT on another?
DHP PowrTuner only works with .NET 1.1
Once you prog the sensor, is it standalone? That is, could you program the sensor on one computer and log it with PT on another?
#6
Senior Member
True Car Nut
Thread Starter
Originally Posted by agrazela
Hmm, was reading the JAW docs and it only works with Micro$oft .NET framework 2.0
DHP PowrTuner only works with .NET 1.1
Once you prog the sensor, is it standalone? That is, could you program the sensor on one computer and log it with PT on another?
DHP PowrTuner only works with .NET 1.1
Once you prog the sensor, is it standalone? That is, could you program the sensor on one computer and log it with PT on another?
Once you calibrate the sensor, you don't need the computer hooked up anymore..
If you sign up on the forums and ask Alan, I'm sure he could help you do what you want if it'* possible. I've seen him help others when/if he could.
#8
Junior Member
Posts like a Ricer Type-R
I still think my Innovate was a pretty good deal considering what came with it. Gauge, sensor, bung, plug, interface module, software, programmable, etc.
And a warranty. Well worth the money. More than this? Sure, but worth it.
And a warranty. Well worth the money. More than this? Sure, but worth it.
#10
Senior Member
True Car Nut
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 95naSTA
Originally Posted by willwren
And a warranty.
just need the man Chip that has the programming and stuff.