CAI Extender? (HighTempSilicone)
#1
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: Mar 2004
Location: Monroe Michigan
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
CAI Extender? (HighTempSilicone)
My CAI right now is just a bit too short, i want to put it up next to the light so i can get the optimum air i need. I was wondering if this coupler from HighTempSilicone would work, just slide one end over the tube, and one end over the filter, only problem i could think of is that the filter wouldnt have enough length that would slide into the coupler to make it hold its weight?
http://www.hightempsilicone.com/Cate...=3&selection=5
http://www.hightempsilicone.com/Cate...=3&selection=5
#3
Junior Member
Posts like a Ricer Type-R
He'* actually visited our site. Look for the username that matches the business name
Those look very similar in function and construction to the one on my ADTR.
Those look very similar in function and construction to the one on my ADTR.
#5
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: Mar 2004
Location: Monroe Michigan
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
Ok im thinking abour ordering this then, are there any other ways to extend my pipe that will still fit the filter and doesnt cause too much turbulence (threw MAF screen away, cant put back on)
#8
Senior Member
True Car Nut
Join Date: Feb 2004
Location: Pennsylvania
Posts: 5,177
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BonneMeMN
Get a longer filter. 9" K&N'* are popular.
#9
The coupler is only 3" in length. HOw much weight does this coupler need to support? Depending on the required length, the hose will not collapse. The long the hose length the higher the chance of a collapsed hose.
Let me know the weight and the length and I will see if I can give you my opinion.
Jim
Let me know the weight and the length and I will see if I can give you my opinion.
Jim