'94 SSE: Chips, UDP, ANYTHING?
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Dec 2004
Location: Zelienople, Pennsylvania
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
'94 SSE: Chips, UDP, ANYTHING?
After a couple of years with the mistake known as the 3.1 V6 and the W-body world, I know what it'* like to have absolutely no performance aftermarket to speak of. There was always FFP/60V6/Vegeta with the peformance chips, FFP with the UDP'* and dogbones, and TGP'* which had the LG5 turbo 3.1 setup, but other than that, there was absolutely NO aftermarket for these cars at all. So, I'm basically trying to find a performance chip (that won't rob me. I found one for $350.. **** that. If anyone knows how to program these cars, shoot me an IM sometime. I'm interested), underdrive pulley, and other random easy bolt-on performance fixes for my Bonne. The 3800 is great, but I'd rather not have to resort to swapping in a Series II L67 to get some sort of real "performance" out of the car. Thanks guys!
#3
Senior Member
True Car Nut
I've got the same 1.5 pcm and i've been working with www.gmtuners.com
So far i've got higher shifts, slightly higher lift, fuel and spark table re mapping.
I'm planning on more tuning and having a 3.33 fdr programmed in.
He'* done a 4t60/L67 turbo swap in his fiero.
But the quality of the chip will rely on your ability to provide good scantool data or even better dyno data.
So far i've got higher shifts, slightly higher lift, fuel and spark table re mapping.
I'm planning on more tuning and having a 3.33 fdr programmed in.
He'* done a 4t60/L67 turbo swap in his fiero.
But the quality of the chip will rely on your ability to provide good scantool data or even better dyno data.
Thread
Thread Starter
Forum
Replies
Last Post
CDecker
Performance, Brainstorming & Tuning
2
07-12-2002 11:54 AM