3800 series II with 4T65-E Tranny question
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Oct 2009
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
3800 series II with 4T65-E Tranny question
is there any way that i can wire a torque converter lockup switch into this transmission that anyone knows of? Also, i am curious as to if i can wire in some unit or something that allows me to hold the car in a gear to red line ( not that i intend to ). I use a B&M quicksilver with my car and i'm sick of the 'panic shifts' that the car does when i don't shift as it would like me to.
#3
Member
Posts like a V-Tak
Thread Starter
Join Date: Oct 2009
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
it is close to what im looking for, but i was hoping for more of a DIY job like the wheel spin sensor mod. just a simple switch, you know? thank you very much for that site though!
#6
Senior Member
True Car Nut
Join Date: Jul 2010
Location: Danville, Illinois
Posts: 2,469
Likes: 0
Received 0 Likes
on
0 Posts
You can trip it if you have a TCC relay in your fuse box. I forget which pin it is on the relay, but if you ground one of the pins it will trip the relay.
I've thought about doing this but never tried it.
Let us know how it goes.
I've thought about doing this but never tried it.
Let us know how it goes.
#8
Senior Member
Posts like a Turbo