Olds 98 1985y 3.8 black smoke no idle
#21
Senior Member
#22
Junior Member
Posts like a Ricer Type-R
Thread Starter
#23
Junior Member
Posts like a Ricer Type-R
Thread Starter
Hello guys!
i have checked with OBD1 when car was not started no fault codes.
i will try to start and see live data maybe you can suggest me what I can check in live data?
or anyone else has any suggestions what else to check.
as well attaching one interesting screenshot what was on scanner.
there are no MAP in this car it uses MAF
i have checked with OBD1 when car was not started no fault codes.
i will try to start and see live data maybe you can suggest me what I can check in live data?
or anyone else has any suggestions what else to check.
as well attaching one interesting screenshot what was on scanner.
there are no MAP in this car it uses MAF
#24
Senior Member
Do you know how to use that tool? That was the first scan tool I used. The TPS and MAP are both out of range. Make sure they are connected correctly and inspect the wiring.
#25
Junior Member
Posts like a Ricer Type-R
Thread Starter
Hello.
Update. I have inspected all wiring drom knock sensor, tps, iac, maf to ecu. And all communications and wiring is correct.
One thing what i have noticed is this esc module. We do get all signals from knock sensor, maf.
But if I unplug ESC module and start car it does not changes at all. Everything is same.
Attaching photo
Update. I have inspected all wiring drom knock sensor, tps, iac, maf to ecu. And all communications and wiring is correct.
One thing what i have noticed is this esc module. We do get all signals from knock sensor, maf.
But if I unplug ESC module and start car it does not changes at all. Everything is same.
Attaching photo
#26
Junior Member
Posts like a Ricer Type-R
Thread Starter
Hello.
Update. I have inspected all wiring drom knock sensor, tps, iac, maf to ecu. And all communications and wiring is correct.
One thing what i have noticed is this esc module. We do get all signals from knock sensor, maf.
But if I unplug ESC module and start car it does not changes at all. Everything is same.
Attaching photo
Update. I have inspected all wiring drom knock sensor, tps, iac, maf to ecu. And all communications and wiring is correct.
One thing what i have noticed is this esc module. We do get all signals from knock sensor, maf.
But if I unplug ESC module and start car it does not changes at all. Everything is same.
Attaching photo
#28
Senior Member
Does the engine stumble when tapping the sensor?
#30
Senior Member
If the engine ran better with it disconnected then the sensor needs replacing.