94' Oldsmobile Eighty-Eight Turn Signal Problem
#11
In any case,
The Flasher is working normally, and the Fuses seem to be in tact. (not burnt)
The only thing I can think of is to replace the entire Arm (with the wind shield wipers, move up/down for turn signals, etc)
Is that a difficult process?
The Flasher is working normally, and the Fuses seem to be in tact. (not burnt)
The only thing I can think of is to replace the entire Arm (with the wind shield wipers, move up/down for turn signals, etc)
Is that a difficult process?
#12
Retired
You do have 2 different flashers if I recall.
__________________
Retired Administrator
Retired Administrator
#14
I see Fuse 8. 20A going to the Flasher, and that going to the Purple Wire on the Directional Switch.
So to find any problem, Fuse 8. 20A Would be my first stop, then the Flasher?
Seems easy enough.
I looked up the location of the flasher, and unfortunately its under the drivers side dash being held in place by 2 very annoying Bolts. I got a project tomorrow!
Thanks for any help, and anymore help would be very appreciated.
So to find any problem, Fuse 8. 20A Would be my first stop, then the Flasher?
Seems easy enough.
I looked up the location of the flasher, and unfortunately its under the drivers side dash being held in place by 2 very annoying Bolts. I got a project tomorrow!
Thanks for any help, and anymore help would be very appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
Martinnhs12
Oldsmobile
2
10-18-2011 11:19 AM
Martinnhs12
Oldsmobile
28
09-20-2011 06:46 AM
92olds88royale
Performance, Brainstorming & Tuning
21
06-05-2006 09:59 PM
92olds88royale
Performance, Brainstorming & Tuning
3
05-08-2006 08:00 AM