P1673
#1
Retired Senior Admin
Expert Gearhead
Thread Starter
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 29 Likes
on
25 Posts
P1673
P1673
Description
ENGINE HOT LIGHT CONTROL CIRCUIT
Output Driver Modules (ODM) are used by PCM to turn on
current-driven devices needed to control various engine and transaxle
functions. Each ODM can control up to 7 outputs by supplying ground to
device PCM is commanding on. ODMs can diagnose each circuit
individually. If ODM output (ENGINE HOT light indicator driver
circuit) detects an improper voltage level, DTC will set.
Symptoms
You likely won't notice any drivability problems.
Causes
Solutions
Description
ENGINE HOT LIGHT CONTROL CIRCUIT
Output Driver Modules (ODM) are used by PCM to turn on
current-driven devices needed to control various engine and transaxle
functions. Each ODM can control up to 7 outputs by supplying ground to
device PCM is commanding on. ODMs can diagnose each circuit
individually. If ODM output (ENGINE HOT light indicator driver
circuit) detects an improper voltage level, DTC will set.
Symptoms
You likely won't notice any drivability problems.
Causes
- An improper voltage level has been detected on ENGINE HOT
light indicator driver circuit.
Solutions
- Check for shorts or bad connections in ENGINE HOT light
control circuit. - Replace fuse.