I just installed a new radio in my wife * 1992 Grand am. During the insatll the ABS light came on, interior lights and buzzer stays on. If I pull the ALARM fuse, everything goes off but im left without lights. I know just leaving the fuse out kinda solves the problem, but she needs lights. I was extermely safe when installing the radio, but if any wires would have touched would that have caused the ABS light to trigger Thanx in advance "TheKaddyKid"

You find anyspare wires in the radio leads?

ya there was a pink, brown, grey,. The original owner had hacked off the factory harness and left me with *++T.

Heh, I love those. I'm looking it up on a technicians forum.

1992-93 Pontiac Grand Am Stereo Information
Constant 12V+ Orange
Switched 12V+ Yellow
Ground Black
Illumination Gray
Dimmer Brown
Antenna Trigger Pink
Antenna Right Rear
Front Speakers 4" x 6" Doors
Left Front (+) Tan
Left Front (-) Gray
Right Front (+) Light Green
Right Front (-) Dark Green
Rear Speakers 6" x 9" Rear Deck
Left Rear (+) Brown
Left Rear (-) Yellow
Right Rear (+) Dark Blue
Right Rear (-) Light Blue

the12volt.com Install bay FTW!!!

General Chat is the place to discuss Bonnevilles.

Moving to the Lounge...

Thank Damemorder. I tried looking on that site, I couldnt find nutin. I just got me all pi##ed when I found the rats nest of wires. Any knowledge of why the interior lights and buzzer stay on......im not even questioning the ABS light yet. Thanx

I have no idea. Did you try connecting the wires like factory yet? If you have pink and brown hooked to the power leads of the radio it could be sensing the resistance and figuring your headlights are on... Basically if you did something and it starts acting weird, Undo whatever.