Bonneville Sandrail
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Dec 2006
Location: Mesa, AZ
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
![skelleyaz is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
I'm new to this site. I recently purchased a sandrail with a Series one engine. I believe the engine is from a 1994 Bonne. This is what I know so far:
Smaller pulley, but I'm nor sure how to measure it. The outer lip of the pulley is 2.75", I didn't measure the inside.
10 lbs of boost under load.
180 thermostat - drilled
Headers
K&N
LINX computer
Fuel pressure regulator set at 45 lbs
Ordered new Aluminum valve covers from RD Performance today
Eliminated the valve cover breathers since photo - at the recommendation of Seriesoneperformance
NGK TR55IX plugs but ordered TR7IX - thought colder head range would be better under boost
5/16" rocker studs with roller fulcrums
Interested in 1.8 rockers from ZZP, but not sure if my LINX computer will recognize. Also interested in intercooler for my M62, but cant find one. Where can I improve this motor without changing cams? Throttle body spacer or new Throttle body? IF this blows, I think I'd switch to a Series 2 or 3. Basically, I want more power.
![](http://livedigital.com/content/image/1275939.jpg)
![](http://livedigital.com/content/image/1275938.jpg)
![](http://livedigital.com/content/image/1275940.jpg)
Comments appreciated.
skelley
Mesa, AZ
Smaller pulley, but I'm nor sure how to measure it. The outer lip of the pulley is 2.75", I didn't measure the inside.
10 lbs of boost under load.
180 thermostat - drilled
Headers
K&N
LINX computer
Fuel pressure regulator set at 45 lbs
Ordered new Aluminum valve covers from RD Performance today
Eliminated the valve cover breathers since photo - at the recommendation of Seriesoneperformance
NGK TR55IX plugs but ordered TR7IX - thought colder head range would be better under boost
5/16" rocker studs with roller fulcrums
Interested in 1.8 rockers from ZZP, but not sure if my LINX computer will recognize. Also interested in intercooler for my M62, but cant find one. Where can I improve this motor without changing cams? Throttle body spacer or new Throttle body? IF this blows, I think I'd switch to a Series 2 or 3. Basically, I want more power.
![](http://livedigital.com/content/image/1275939.jpg)
![](http://livedigital.com/content/image/1275938.jpg)
![](http://livedigital.com/content/image/1275940.jpg)
Comments appreciated.
skelley
Mesa, AZ
#3
Member
Posts like a V-Tak
Thread Starter
Join Date: Dec 2006
Location: Mesa, AZ
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
![skelleyaz is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Any ideas to dress up the engine bay? I've ordered polished Aluminum valve covers.
Does anyone made Aluminum pulleys?
I think in the off-season I will start chroming the brackets - if the motor holds!
SKELLEY
Does anyone made Aluminum pulleys?
I think in the off-season I will start chroming the brackets - if the motor holds!
SKELLEY
#4
Senior Member
True Car Nut
Join Date: May 2005
Location: _Phoenix, AZ_ _WCBF '05, '06, '07 Survivor_ ____NEBF '07 Remnant___
Posts: 3,448
Likes: 0
Received 6 Likes
on
6 Posts
![Echo SSEI is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Welcome to the club. You need more power?
I would imagine that the SCed motor in the lightweight sandrail would be pretty impressive, but like many here, there is no such thing as "too much power".
Looks like a great set-up and the motor does look wonderful in there.
As far as performance goodies go, I don't believe that anyone makes an intercooler for the Series I motor. It would be a custom job.
I think that is the factory stock pulley size for a Series I, and if so, a smaller pulley will do wonders. I am sure the SI guys will be here shortly to tell you all about the "go fast" stuff you can do.
![Shocked](https://www.gmforum.com/gm/images/smilies/icon_eek.gif)
Looks like a great set-up and the motor does look wonderful in there.
As far as performance goodies go, I don't believe that anyone makes an intercooler for the Series I motor. It would be a custom job.
I think that is the factory stock pulley size for a Series I, and if so, a smaller pulley will do wonders. I am sure the SI guys will be here shortly to tell you all about the "go fast" stuff you can do.
#5
Member
Posts like a V-Tak
Thread Starter
Join Date: Dec 2006
Location: Mesa, AZ
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
![skelleyaz is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
The Headers were custom made and jet-coated last year. I don't think they would work in a FWD application. I'll take more photos this weekend and post.
skelley
skelley
#6
Senior Member
True Car Nut
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Welcome to BC!
The smaller SC pullies are available in colors, but I'm not currently aware of any specific aftermarket aluminum pulleys to replace/dress the rest of them. Maybe someone else here does.
![Very Happy](https://www.gmforum.com/gm/images/smilies/biggrin.gif)
The smaller SC pullies are available in colors, but I'm not currently aware of any specific aftermarket aluminum pulleys to replace/dress the rest of them. Maybe someone else here does.
#8
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
![1993 SLE is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
well Since your in AZ ,and Echo didnt notice (you'll have to excuse him) im sure to other local guys would be interested in seeing the rail, or just to come and hang out when they are wrenching on the Bonnes...
Welcome to the club, and i hope you stick around
BOB.....have you had your monster?, go and check that thing out will ya
Welcome to the club, and i hope you stick around
BOB.....have you had your monster?, go and check that thing out will ya
#9
Senior Member
True Car Nut
Join Date: May 2005
Location: _Phoenix, AZ_ _WCBF '05, '06, '07 Survivor_ ____NEBF '07 Remnant___
Posts: 3,448
Likes: 0
Received 6 Likes
on
6 Posts
![Echo SSEI is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Originally Posted by 1993 SLE
well Since your in AZ ,and Echo didnt notice (you'll have to excuse him) im sure to other local guys would be interested in seeing the rail
BOB.....have you had your monster?, go and check that thing out will ya
BOB.....have you had your monster?, go and check that thing out will ya
![Wink](https://www.gmforum.com/gm/images/smilies/wink.gif)
Anyways, rather than seeming pushy and asking "When can I see it?", I figured it is only a matter of time before I see it in person :P Already have been using the PM function with him since this morning
![Cool](https://www.gmforum.com/gm/images/smilies/icon_cool.gif)
The torque in that thing must feel amazing
![Twisted Evil](https://www.gmforum.com/gm/images/smilies/icon_twisted.gif)