2004 GMC Yukon Denali XL 6.0 V8
#11
Retired
Thank you!
__________________
Retired Administrator
Retired Administrator
#12
Junior Member
Posts like a Ricer Type-R
Thread Starter
Hi Mike,
So i did what you asked me to do as per your instructions and i didn't get any error code. I will drive around and see if it comes back.
Thank you.
So i did what you asked me to do as per your instructions and i didn't get any error code. I will drive around and see if it comes back.
Thank you.
#13
Retired
Thank you, I thought something didn't seem right when you said those codes were still their after a code clearing. Typically EVAP fault codes won't trip until a drive cycle has been completed. and P0300'* won't trip unless you feel the engine running like ****, and then the CEL is FLASHING. Which is a bad thing.
__________________
Retired Administrator
Retired Administrator
The following users liked this post:
Mike (05-20-2022)
#15
Retired
Yes, please keep us updated.
__________________
Retired Administrator
Retired Administrator
#17
Senior Member
#19
Senior Member
Is the CEL on? This don't make sense.