2000 Jimmy 4.3 vortec no start please help
#32
Member
Posts like a V-Tak
Thread Starter
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Ok I installed the new LIM gasket set and fuel pressure regulator and it started right up. Looks like the regulator was that bad very happy about it! I am going to take new fuel pressure readings in the morning and of course change the oil it'* definitely tanted. Thanks for all the help jwfirebird and to everyone else.
#34
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Realize this is an old issue. But solved my problem last night, just want to share.
The female connection on the ignition module wiring harness seems to cause most problems, either from arcing or in my case one of the four pins not connecting properly. Socket had been pushed down into holder. A two minute fix, started first click, after days of cranking with no fire.
Hope this helps.
The female connection on the ignition module wiring harness seems to cause most problems, either from arcing or in my case one of the four pins not connecting properly. Socket had been pushed down into holder. A two minute fix, started first click, after days of cranking with no fire.
Hope this helps.
The following 2 users liked this post by 98jimmy:
GunsOfNavarone (11-26-2014),
Soft Ride (11-26-2014)
#35
Retired Administrator
![](/images/badges/Gearhead.png)
True Car Nut
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Realize this is an old issue. But solved my problem last night, just want to share.
The female connection on the ignition module wiring harness seems to cause most problems, either from arcing or in my case one of the four pins not connecting properly. Socket had been pushed down into holder. A two minute fix, started first click, after days of cranking with no fire.
Hope this helps.
The female connection on the ignition module wiring harness seems to cause most problems, either from arcing or in my case one of the four pins not connecting properly. Socket had been pushed down into holder. A two minute fix, started first click, after days of cranking with no fire.
Hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
jhowell562
GMC/Chevrolet Truck/SUV
5
01-07-2014 06:36 AM
AlienSlingBlade
Introductions for new members
2
08-02-2013 08:58 PM
Rosco the Iroc
Your Ride: GM Pictures & Videos
34
05-27-2005 10:02 PM