1995 4l60e Replaced torque converter, oil pump, and all solenoids
#11
Retired
This thread should be merged with his existing repair thread.
__________________
Retired Administrator
Retired Administrator
The following users liked this post:
CathedralCub (05-30-2023)
#12
Junior Member
Posts like a Ricer Type-R
Thread Starter
my oil pressure is good and I now got it to go out of limp mode when I first start the truck and put it into drive but the next time I stop and it downshifts it throws itself into limp mode and is stuck in second with no reverse or other gears
the filter is new fluid has no metal at all I have codes 81 82 83 for shift solenoids which makes me think it’* a separate issue since I replaced every solenoid in the trans so now the issue is getting it to stay out of limp mode
ps: every gear works great until I come to the first stop after downshift
The following users liked this post:
CathedralCub (06-14-2023)
#13
Senior Member
I'd test the wiring to the tranny. Start by disconnecting the electrical connector and check the solenoids for issues.
The following users liked this post:
CathedralCub (06-14-2023)
#14
Junior Member
Posts like a Ricer Type-R
Thread Starter
The following users liked this post:
CathedralCub (06-14-2023)
#15
Senior Member
Oh man, that'* got to be fixed. That'* likely your problem.
The following users liked this post:
CathedralCub (06-14-2023)
#16
Senior Member
True Car Nut
#17
Senior Member
True Car Nut
#18
Junior Member
Posts like a Ricer Type-R
Thread Starter
The following users liked this post:
CathedralCub (06-19-2023)
#19
Senior Member
The following users liked this post:
CathedralCub (06-19-2023)
#20
Junior Member
Posts like a Ricer Type-R
Thread Starter
The following users liked this post:
CathedralCub (06-19-2023)