When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So I started off driving one day with hard shifting and then BOOM I though I blew my torque converter so I dropped the trans same day and found that my pump went out and broke the 2 pieces that hold on the torque converter so I ordered a new pump and now I’m having trouble putting the new one in as it will not set in place I have no idea what I’m doing wrong and need some pointers
Does the shaft rotate OK? Is it straight? I think the shaft may be bent right at the bearing. Even a small amount will bind it up. Did the pump pull off easy enough?
Does the shaft rotate OK? Is it straight? I think the shaft may be bent right at the bearing. Even a small amount will bind it up. Did the pump pull off easy enough?
I figured it out guys part of the shaft was pressed up against the sidewall so I moved it and it slid right in lol the trans is back in my truck now and she’* back on the road the shifting is a little rough any ideas on what could cause that?
I figured it out guys part of the shaft was pressed up against the sidewall so I moved it and it slid right in lol the trans is back in my truck now and she’* back on the road the shifting is a little rough any ideas on what could cause that?
It'll take a bit for it to get the adaptives learned.