Turbo Regal
#11
Senior Member
True Car Nut
Join Date: Sep 2006
Location: Indianapolis, IN
Posts: 4,606
Likes: 0
Received 0 Likes
on
0 Posts
![radomirthegreat is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Very nice! So, this L32 will now have a more awesome cam to go with its new trans? What else is being done? Aren't the rockers modified 1.9s?
#12
DINOSAURUS BOOSTUS
![](/images/badges/Gearhead.png)
Expert Gearhead
Thread Starter
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Jumped back on the car tonight. The trans is ready to come out once the new trans has been checked out. I'm at the point of lowering the subframe and the trans is out in a couple of minutes. There'* only two bolts partially holding it to the motor.
Pushed it up the driveway (yes by myself)
![Name: IMG_6883.jpg
Views: 33
Size: 95.7 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21661d1501262321-turbo-regal-img_6883.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Cleaned the garage and ....where did it go?
![Name: IMG_6884.jpg
Views: 39
Size: 125.9 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21662d1501262321-turbo-regal-img_6884.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Again .. solo, slid it into the preferred bay for trans swaps.
![Name: IMG_6885.jpg
Views: 32
Size: 92.0 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21663d1501262321-turbo-regal-img_6885.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6886.jpg
Views: 37
Size: 82.5 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21664d1501262321-turbo-regal-img_6886.jpg?*=7337394c131e6d13c5a168cd3ebff318)
The plugs
![Name: IMG_6887.jpg
Views: 38
Size: 68.8 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21665d1501262321-turbo-regal-img_6887.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Acquainting them...
![Name: IMG_6888.jpg
Views: 32
Size: 123.0 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21666d1501262321-turbo-regal-img_6888.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6889.jpg
Views: 32
Size: 122.7 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21667d1501262321-turbo-regal-img_6889.jpg?*=7337394c131e6d13c5a168cd3ebff318)
If you don't have a prybar like this..you gotta be fighting the driverside axle. This baby makes it jump out.
![Name: IMG_6890.jpg
Views: 39
Size: 62.6 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21668d1501262321-turbo-regal-img_6890.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6891.jpg
Views: 32
Size: 112.0 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21669d1501262321-turbo-regal-img_6891.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Uhhhhh... I didn't remove anything over here.
![](https://i20.photobucket.com/albums/b246/billboost37/Modding%20Visits/Andrew%20Sleeper99%200910/IMG_6892.jpg)
![Name: IMG_6893.jpg
Views: 40
Size: 121.7 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21670d1501262321-turbo-regal-img_6893.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Diff to engine bracket is missing. Luckily Paul sent one and I've got a couple of extras hanging out too.
Backwards bolt..lol
![Name: IMG_6894.jpg
Views: 33
Size: 97.0 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21671d1501262321-turbo-regal-img_6894.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6895.jpg
Views: 36
Size: 129.9 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21672d1501262321-turbo-regal-img_6895.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Power steering rack is unbolted, starter is out, flex to TC bolts out, ps line to frame..out.
Cruisin
![Name: IMG_6896.jpg
Views: 35
Size: 139.0 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21673d1501262321-turbo-regal-img_6896.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6897.jpg
Views: 35
Size: 126.2 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21674d1501262321-turbo-regal-img_6897.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6898.jpg
Views: 33
Size: 119.8 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21675d1501262321-turbo-regal-img_6898.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Usually it'* 1 4x4 and 1 chain. I'm being super careful on this one of a kind car.
![Name: IMG_6899.jpg
Views: 34
Size: 138.9 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21676d1501262321-turbo-regal-img_6899.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6900.jpg
Views: 28
Size: 119.1 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21677d1501262321-turbo-regal-img_6900.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Chilling
![Name: IMG_6901.jpg
Views: 30
Size: 114.6 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21678d1501262321-turbo-regal-img_6901.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6902.jpg
Views: 38
Size: 98.7 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21679d1501262321-turbo-regal-img_6902.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Hanging with a friend
Pushed it up the driveway (yes by myself)
![Name: IMG_6883.jpg
Views: 33
Size: 95.7 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21661d1501262321-turbo-regal-img_6883.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Cleaned the garage and ....where did it go?
![Name: IMG_6884.jpg
Views: 39
Size: 125.9 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21662d1501262321-turbo-regal-img_6884.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Again .. solo, slid it into the preferred bay for trans swaps.
![Name: IMG_6885.jpg
Views: 32
Size: 92.0 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21663d1501262321-turbo-regal-img_6885.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6886.jpg
Views: 37
Size: 82.5 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21664d1501262321-turbo-regal-img_6886.jpg?*=7337394c131e6d13c5a168cd3ebff318)
The plugs
![Name: IMG_6887.jpg
Views: 38
Size: 68.8 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21665d1501262321-turbo-regal-img_6887.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Acquainting them...
![Name: IMG_6888.jpg
Views: 32
Size: 123.0 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21666d1501262321-turbo-regal-img_6888.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6889.jpg
Views: 32
Size: 122.7 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21667d1501262321-turbo-regal-img_6889.jpg?*=7337394c131e6d13c5a168cd3ebff318)
If you don't have a prybar like this..you gotta be fighting the driverside axle. This baby makes it jump out.
![Name: IMG_6890.jpg
Views: 39
Size: 62.6 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21668d1501262321-turbo-regal-img_6890.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6891.jpg
Views: 32
Size: 112.0 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21669d1501262321-turbo-regal-img_6891.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Uhhhhh... I didn't remove anything over here.
![](https://i20.photobucket.com/albums/b246/billboost37/Modding%20Visits/Andrew%20Sleeper99%200910/IMG_6892.jpg)
![Name: IMG_6893.jpg
Views: 40
Size: 121.7 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21670d1501262321-turbo-regal-img_6893.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Diff to engine bracket is missing. Luckily Paul sent one and I've got a couple of extras hanging out too.
Backwards bolt..lol
![Name: IMG_6894.jpg
Views: 33
Size: 97.0 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21671d1501262321-turbo-regal-img_6894.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6895.jpg
Views: 36
Size: 129.9 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21672d1501262321-turbo-regal-img_6895.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Power steering rack is unbolted, starter is out, flex to TC bolts out, ps line to frame..out.
![Mr. Green](https://www.gmforum.com/gm/images/smilies/icon_mrgreen.gif)
Cruisin
![Name: IMG_6896.jpg
Views: 35
Size: 139.0 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21673d1501262321-turbo-regal-img_6896.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6897.jpg
Views: 35
Size: 126.2 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21674d1501262321-turbo-regal-img_6897.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6898.jpg
Views: 33
Size: 119.8 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21675d1501262321-turbo-regal-img_6898.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Usually it'* 1 4x4 and 1 chain. I'm being super careful on this one of a kind car.
![Name: IMG_6899.jpg
Views: 34
Size: 138.9 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21676d1501262321-turbo-regal-img_6899.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6900.jpg
Views: 28
Size: 119.1 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21677d1501262321-turbo-regal-img_6900.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Chilling
![Name: IMG_6901.jpg
Views: 30
Size: 114.6 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21678d1501262321-turbo-regal-img_6901.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6902.jpg
Views: 38
Size: 98.7 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21679d1501262321-turbo-regal-img_6902.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Hanging with a friend
![Name: IMG_6903.jpg
Views: 31
Size: 74.7 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21680d1501262321-turbo-regal-img_6903.jpg?*=7337394c131e6d13c5a168cd3ebff318)
#13
DINOSAURUS BOOSTUS
![](/images/badges/Gearhead.png)
Expert Gearhead
Thread Starter
![Default](https://www.gmforum.com/images/icons/icon1.gif)
A little tired tonight. Neighbors want to go out for dinner, sounds like a plan. I'll pick up a trans filter while out and finish prepping the trans. Install is likely for tomorrow night.
Here'* Merv!
![Name: IMG_6904.jpg
Views: 34
Size: 100.4 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21612d1501262216-turbo-regal-img_6904.jpg?*=7337394c131e6d13c5a168cd3ebff318)
GM uses torx head for the bottom four bolts...no reason. There'* usually one that fights. We see who lost that battle.
![Name: IMG_6907.jpg
Views: 25
Size: 134.9 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21613d1501262216-turbo-regal-img_6907.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6907.jpg
Views: 25
Size: 134.9 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21613d1501262216-turbo-regal-img_6907.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Pulled the cover
![Name: IMG_6909.jpg
Views: 27
Size: 126.9 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21615d1501262216-turbo-regal-img_6909.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6910.jpg
Views: 33
Size: 96.8 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21616d1501262216-turbo-regal-img_6910.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6911.jpg
Views: 44
Size: 86.0 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21617d1501262216-turbo-regal-img_6911.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6912.jpg
Views: 113
Size: 93.6 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21618d1501262216-turbo-regal-img_6912.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Wiring harness off
![Name: IMG_6914.jpg
Views: 31
Size: 126.8 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21619d1501262216-turbo-regal-img_6914.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Pump off
![Name: IMG_6915.jpg
Views: 38
Size: 132.8 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21620d1501262216-turbo-regal-img_6915.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Remove only required bolts to pull valve body and channel plate as one.
![](https://i20.photobucket.com/albums/b246/billboost37/Modding%20Visits/Andrew%20Sleeper99%200910/IMG_6916.jpg)
Size of 15/16" chain I have laying around
![Name: IMG_6922.jpg
Views: 34
Size: 53.7 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21621d1501262216-turbo-regal-img_6922.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Size of Andrews chain
![Name: IMG_6923.jpg
Views: 30
Size: 89.6 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21622d1501262216-turbo-regal-img_6923.jpg?*=7337394c131e6d13c5a168cd3ebff318)
The view
![Name: IMG_6925.jpg
Views: 35
Size: 131.5 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21623d1501262216-turbo-regal-img_6925.jpg?*=7337394c131e6d13c5a168cd3ebff318)
4th Clutches
![Name: IMG_6926.jpg
Views: 33
Size: 127.2 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21624d1501262216-turbo-regal-img_6926.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Hardened 4th clutch hub
![Name: IMG_6927.jpg
Views: 37
Size: 130.8 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21625d1501262216-turbo-regal-img_6927.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Manual states you should have 1/8" or more to reuse chain. Looks great
![Name: IMG_6931.jpg
Views: 37
Size: 86.5 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21626d1501262216-turbo-regal-img_6931.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Someone adapted to use in a newer car
![Name: IMG_6934.jpg
Views: 31
Size: 82.1 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21627d1501262216-turbo-regal-img_6934.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Readying for filter
![Name: IMG_6935.jpg
Views: 35
Size: 79.1 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21628d1501262216-turbo-regal-img_6935.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6936.jpg
Views: 33
Size: 48.8 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21629d1501262216-turbo-regal-img_6936.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6937.jpg
Views: 41
Size: 121.3 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21630d1501262216-turbo-regal-img_6937.jpg?*=7337394c131e6d13c5a168cd3ebff318)
I'm out for dinner
Got back from the Chowder Pot (Yeahhhhh), picked up the trans filter. Would you believe it didn't fit snug in the collar? The blind pilot bearing tool made quick work of removing the old collar and a large socket and rubber mallet installed the new one like butter. Filter now fits nice and snug like it should. Pan went back on and trans is wheeled over to the side for the night.
At this point it'* lower subframe and pop the old trans out, put the new trans in place and bolt it back up. The starter, axles diff bracket etc etc will go in and then the subframe will pop back on. Hopefully with new bushings. I think they are that for that style subframe.
Potentially I could be starting it up Monday/Tuesday.
Here'* Merv!
![Name: IMG_6904.jpg
Views: 34
Size: 100.4 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21612d1501262216-turbo-regal-img_6904.jpg?*=7337394c131e6d13c5a168cd3ebff318)
GM uses torx head for the bottom four bolts...no reason. There'* usually one that fights. We see who lost that battle.
![Name: IMG_6907.jpg
Views: 25
Size: 134.9 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21613d1501262216-turbo-regal-img_6907.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6907.jpg
Views: 25
Size: 134.9 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21613d1501262216-turbo-regal-img_6907.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Pulled the cover
![Name: IMG_6909.jpg
Views: 27
Size: 126.9 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21615d1501262216-turbo-regal-img_6909.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6910.jpg
Views: 33
Size: 96.8 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21616d1501262216-turbo-regal-img_6910.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6911.jpg
Views: 44
Size: 86.0 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21617d1501262216-turbo-regal-img_6911.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6912.jpg
Views: 113
Size: 93.6 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21618d1501262216-turbo-regal-img_6912.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Wiring harness off
![Name: IMG_6914.jpg
Views: 31
Size: 126.8 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21619d1501262216-turbo-regal-img_6914.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Pump off
![Name: IMG_6915.jpg
Views: 38
Size: 132.8 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21620d1501262216-turbo-regal-img_6915.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Remove only required bolts to pull valve body and channel plate as one.
![](https://i20.photobucket.com/albums/b246/billboost37/Modding%20Visits/Andrew%20Sleeper99%200910/IMG_6916.jpg)
Size of 15/16" chain I have laying around
![Name: IMG_6922.jpg
Views: 34
Size: 53.7 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21621d1501262216-turbo-regal-img_6922.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Size of Andrews chain
![Name: IMG_6923.jpg
Views: 30
Size: 89.6 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21622d1501262216-turbo-regal-img_6923.jpg?*=7337394c131e6d13c5a168cd3ebff318)
The view
![Name: IMG_6925.jpg
Views: 35
Size: 131.5 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21623d1501262216-turbo-regal-img_6925.jpg?*=7337394c131e6d13c5a168cd3ebff318)
4th Clutches
![Name: IMG_6926.jpg
Views: 33
Size: 127.2 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21624d1501262216-turbo-regal-img_6926.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Hardened 4th clutch hub
![Name: IMG_6927.jpg
Views: 37
Size: 130.8 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21625d1501262216-turbo-regal-img_6927.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Manual states you should have 1/8" or more to reuse chain. Looks great
![Name: IMG_6931.jpg
Views: 37
Size: 86.5 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21626d1501262216-turbo-regal-img_6931.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Someone adapted to use in a newer car
![Name: IMG_6934.jpg
Views: 31
Size: 82.1 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21627d1501262216-turbo-regal-img_6934.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Readying for filter
![Name: IMG_6935.jpg
Views: 35
Size: 79.1 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21628d1501262216-turbo-regal-img_6935.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6936.jpg
Views: 33
Size: 48.8 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21629d1501262216-turbo-regal-img_6936.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6937.jpg
Views: 41
Size: 121.3 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21630d1501262216-turbo-regal-img_6937.jpg?*=7337394c131e6d13c5a168cd3ebff318)
I'm out for dinner
Got back from the Chowder Pot (Yeahhhhh), picked up the trans filter. Would you believe it didn't fit snug in the collar? The blind pilot bearing tool made quick work of removing the old collar and a large socket and rubber mallet installed the new one like butter. Filter now fits nice and snug like it should. Pan went back on and trans is wheeled over to the side for the night.
At this point it'* lower subframe and pop the old trans out, put the new trans in place and bolt it back up. The starter, axles diff bracket etc etc will go in and then the subframe will pop back on. Hopefully with new bushings. I think they are that for that style subframe.
Potentially I could be starting it up Monday/Tuesday.
#15
Retired
![](https://www.gmforum.com/images/ranks/veteran_army.png)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Where are the turbo oil lines connected to?
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
2011 Chevrolet Tahoe PPV
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
2011 Chevrolet Tahoe PPV
#16
DINOSAURUS BOOSTUS
![](/images/badges/Gearhead.png)
Expert Gearhead
Thread Starter
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Who'd like an update?
Subframe fell out of the car
![Name: IMG_6940.jpg
Views: 31
Size: 108.6 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21590d1501262183-turbo-regal-img_6940.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Supported the turbo piping.
![](https://i20.photobucket.com/albums/b246/billboost37/Modding%20Visits/Andrew%20Sleeper99%200910/IMG_6942.jpg)
A few more pictures
![Name: IMG_6944.jpg
Views: 33
Size: 102.7 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21591d1501262183-turbo-regal-img_6944.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6945.jpg
Views: 44
Size: 123.8 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21592d1501262183-turbo-regal-img_6945.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6946.jpg
Views: 33
Size: 129.1 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21593d1501262183-turbo-regal-img_6946.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Trans fell out
![Name: IMG_6947.jpg
Views: 29
Size: 121.5 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21594d1501262183-turbo-regal-img_6947.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6948.jpg
Views: 28
Size: 117.2 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21595d1501262183-turbo-regal-img_6948.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Pulled the converter off to drain it.
![Name: IMG_6949.jpg
Views: 43
Size: 134.7 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21596d1501262183-turbo-regal-img_6949.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6950.jpg
Views: 32
Size: 112.6 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21597d1501262183-turbo-regal-img_6950.jpg?*=7337394c131e6d13c5a168cd3ebff318)
To the untrained eye, you may not know that something is out of place in those last couple pictures. If you turn the converter upside down to pick up the other half of the input shaft. I'm gonna pull out the JB Weld and put this trans back in. Then keep the super trans for myself.
Superglue might not hold, but JB Weld is the way to go.
![Name: IMG_6951.jpg
Views: 37
Size: 68.0 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21598d1501262183-turbo-regal-img_6951.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Andrew broke the input shaft!!!!!!!
![Very Happy](https://www.gmforum.com/gm/images/smilies/biggrin.gif)
Subframe fell out of the car
![Name: IMG_6940.jpg
Views: 31
Size: 108.6 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21590d1501262183-turbo-regal-img_6940.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Supported the turbo piping.
![](https://i20.photobucket.com/albums/b246/billboost37/Modding%20Visits/Andrew%20Sleeper99%200910/IMG_6942.jpg)
A few more pictures
![Name: IMG_6944.jpg
Views: 33
Size: 102.7 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21591d1501262183-turbo-regal-img_6944.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6945.jpg
Views: 44
Size: 123.8 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21592d1501262183-turbo-regal-img_6945.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6946.jpg
Views: 33
Size: 129.1 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21593d1501262183-turbo-regal-img_6946.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Trans fell out
![Name: IMG_6947.jpg
Views: 29
Size: 121.5 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21594d1501262183-turbo-regal-img_6947.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6948.jpg
Views: 28
Size: 117.2 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21595d1501262183-turbo-regal-img_6948.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Pulled the converter off to drain it.
![Name: IMG_6949.jpg
Views: 43
Size: 134.7 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21596d1501262183-turbo-regal-img_6949.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6950.jpg
Views: 32
Size: 112.6 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21597d1501262183-turbo-regal-img_6950.jpg?*=7337394c131e6d13c5a168cd3ebff318)
To the untrained eye, you may not know that something is out of place in those last couple pictures. If you turn the converter upside down to pick up the other half of the input shaft. I'm gonna pull out the JB Weld and put this trans back in. Then keep the super trans for myself.
![Cool](https://www.gmforum.com/gm/images/smilies/icon_cool.gif)
![Name: IMG_6951.jpg
Views: 37
Size: 68.0 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21598d1501262183-turbo-regal-img_6951.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Andrew broke the input shaft!!!!!!!
#17
DINOSAURUS BOOSTUS
![](/images/badges/Gearhead.png)
Expert Gearhead
Thread Starter
![Default](https://www.gmforum.com/images/icons/icon1.gif)
New trans is in and bolted to the engine. Thought you guys would like know.
![Name: IMG_6952.jpg
Views: 30
Size: 115.5 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21588d1501262183-turbo-regal-img_6952.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6953.jpg
Views: 30
Size: 149.2 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21589d1501262183-turbo-regal-img_6953.jpg?*=7337394c131e6d13c5a168cd3ebff318)
I'm off to go hook it all up and put the subframe back in place.
![Name: IMG_6952.jpg
Views: 30
Size: 115.5 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21588d1501262183-turbo-regal-img_6952.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6953.jpg
Views: 30
Size: 149.2 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21589d1501262183-turbo-regal-img_6953.jpg?*=7337394c131e6d13c5a168cd3ebff318)
I'm off to go hook it all up and put the subframe back in place.
#18
DINOSAURUS BOOSTUS
![](/images/badges/Gearhead.png)
Expert Gearhead
Thread Starter
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Already pulled a good input shaft out of the stash.
![Name: IMG_6954.jpg
Views: 40
Size: 148.0 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21577d1501262183-turbo-regal-img_6954.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Some shots
![Name: IMG_6955.jpg
Views: 28
Size: 84.2 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21578d1501262183-turbo-regal-img_6955.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6956.jpg
Views: 28
Size: 139.5 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21579d1501262183-turbo-regal-img_6956.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6957.jpg
Views: 34
Size: 100.5 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21580d1501262183-turbo-regal-img_6957.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![](https://i20.photobucket.com/albums/b246/billboost37/Modding%20Visits/Andrew%20Sleeper99%200910/IMG_6958.jpg)
![Name: IMG_6960.jpg
Views: 29
Size: 108.4 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21581d1501262183-turbo-regal-img_6960.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6961.jpg
Views: 37
Size: 77.4 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21582d1501262183-turbo-regal-img_6961.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6962.jpg
Views: 34
Size: 60.6 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21583d1501262183-turbo-regal-img_6962.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6963.jpg
Views: 47
Size: 101.3 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21584d1501262183-turbo-regal-img_6963.jpg?*=7337394c131e6d13c5a168cd3ebff318)
No more cross your heart chains
![Name: IMG_6964.jpg
Views: 29
Size: 135.0 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21585d1501262183-turbo-regal-img_6964.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Subframe back in.. before it went in.. flex to TC bolts went in, starter, inspection shield, axles, you name it.. it was done before the sub went back in.
![Name: IMG_6965.jpg
Views: 28
Size: 117.2 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21586d1501262183-turbo-regal-img_6965.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6966.jpg
Views: 30
Size: 134.4 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21587d1501262183-turbo-regal-img_6966.jpg?*=7337394c131e6d13c5a168cd3ebff318)
I need to connect one endlink, tighten the balljoints, reconnect abs sensors, bolt the ps cooler loop to the subframe, ps rack to subframe, then it'* reassemble the top end and figure out that coolant hose.
$50 for a ride around the block ... who wants to see what it can do?
![Name: IMG_6954.jpg
Views: 40
Size: 148.0 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21577d1501262183-turbo-regal-img_6954.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Some shots
![Name: IMG_6955.jpg
Views: 28
Size: 84.2 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21578d1501262183-turbo-regal-img_6955.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6956.jpg
Views: 28
Size: 139.5 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21579d1501262183-turbo-regal-img_6956.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6957.jpg
Views: 34
Size: 100.5 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21580d1501262183-turbo-regal-img_6957.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![](https://i20.photobucket.com/albums/b246/billboost37/Modding%20Visits/Andrew%20Sleeper99%200910/IMG_6958.jpg)
![Name: IMG_6960.jpg
Views: 29
Size: 108.4 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21581d1501262183-turbo-regal-img_6960.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6961.jpg
Views: 37
Size: 77.4 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21582d1501262183-turbo-regal-img_6961.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6962.jpg
Views: 34
Size: 60.6 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21583d1501262183-turbo-regal-img_6962.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6963.jpg
Views: 47
Size: 101.3 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21584d1501262183-turbo-regal-img_6963.jpg?*=7337394c131e6d13c5a168cd3ebff318)
No more cross your heart chains
![Name: IMG_6964.jpg
Views: 29
Size: 135.0 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21585d1501262183-turbo-regal-img_6964.jpg?*=7337394c131e6d13c5a168cd3ebff318)
Subframe back in.. before it went in.. flex to TC bolts went in, starter, inspection shield, axles, you name it.. it was done before the sub went back in.
![Name: IMG_6965.jpg
Views: 28
Size: 117.2 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21586d1501262183-turbo-regal-img_6965.jpg?*=7337394c131e6d13c5a168cd3ebff318)
![Name: IMG_6966.jpg
Views: 30
Size: 134.4 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21587d1501262183-turbo-regal-img_6966.jpg?*=7337394c131e6d13c5a168cd3ebff318)
I need to connect one endlink, tighten the balljoints, reconnect abs sensors, bolt the ps cooler loop to the subframe, ps rack to subframe, then it'* reassemble the top end and figure out that coolant hose.
$50 for a ride around the block ... who wants to see what it can do?
#19
DINOSAURUS BOOSTUS
![](/images/badges/Gearhead.png)
Expert Gearhead
Thread Starter