Time for more projects, plus a sweet find
#21
Senior Member
Certified GM nut
Join Date: Oct 2006
Location: burb of detroit. 2 miles north of 8 mile Rd.
Posts: 2,028
Likes: 0
Received 1 Like
on
1 Post
![samueljackson is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Originally Posted by Peterg22000
Originally Posted by samueljackson
please take my advice and lose those morse pads ASAP. run a raybestos quiet stop or another better quality ceramic. DO NOT run the morse, they SUCK.
on a side note, thats does look SWEET!![Shocked](https://www.gmforum.com/gm/images/smilies/icon_eek.gif)
on a side note, thats does look SWEET!
![Shocked](https://www.gmforum.com/gm/images/smilies/icon_eek.gif)
If you dont feel they are the best, Don't cut the man down, say "Hey, hope you have good luck with those pads, they wernt that good for me" Or something along those lines.
(After all, its not like the bads will explode and hit car will corrin(sp?) into a wall at 110MPH
![Roll Eyes](https://www.gmforum.com/gm/images/smilies/rolleyes.gif)
This is NOT a shot at samueljackson more, it my advise to everyone in general, lets try to be alittle more positive when handing out are OPINNION'*
and braking isn't ALL about just friction. it is also about transfer of energy. and in this case it is heat. so if the rotors can better dissipate heat, thats a sacrifice of less friction.. and it does look bada$$ behind those rims too.
#22
Retired Senior Admin
![](/images/badges/Gearhead.png)
Expert Gearhead
Thread Starter
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 29 Likes
on
25 Posts
![Danthurs is a name known to all](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Danthurs is a name known to all](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Danthurs is a name known to all](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Danthurs is a name known to all](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Danthurs is a name known to all](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Danthurs is a name known to all](https://www.gmforum.com/images/reputation/reputation_highpos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Had you told me this before I put them on the car I woudl have exchanged them. But there on the car now, so I will have to see what happens. Thanks anyways.
#23
Senior Member
Certified GM nut
Join Date: Oct 2006
Location: burb of detroit. 2 miles north of 8 mile Rd.
Posts: 2,028
Likes: 0
Received 1 Like
on
1 Post
![samueljackson is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Originally Posted by Danthurs
Had you told me this before I put them on the car I woudl have exchanged them. But there on the car now, so I will have to see what happens. Thanks anyways.
if you bought those locally, they may let you exchange them and just pay the difference. id just hate to see you mess up those nice new rotors.
#25
Member
Posts like a V-Tak
Join Date: May 2005
Location: Tacoma, WA
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
![mike2fix is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
I know the view of some folks here about drilled/slotted rotors, so I won't debate that. But I have used Raybestos Super Stop rotors for years on my 98 and just over a year on my 02, they are slotted and drilled. I use Akebono pads, no dusting and they are wearing like iron, quiet and they just work great.
#26
Junior Member
Posts like a Ricer Type-R
![Default](https://www.gmforum.com/images/icons/icon1.gif)
I'm guilty of it myself, and we get into an area where you can have two scenarios, totally dependent on whether the topic author asked for help selecting components or not.
(And this isn't a slam on Danthurs at all, although this is an example).
I strongly believe that Danthurs would have selected different rotors and possibly even different pads if he'd posted it before he bought them. But every member here has an experience and knowledge level different than anyone else. He may have been steered to these components elsewhere, or by his own good experiences on another vehicle, and maybe felt no need to ask advice here.
This is a good example (sorry, but many thanks at the same time to Danthurs) of why it'* a good idea to ask first and gather some collective experience that relates, then go purchase after making your own informed decision based on all inputs.
Are his brakes going to blow up on him? Probably not, but he'* not going to have much luck getting them turned, and his brake performance might not be up to what he COULD have had. Improved or worse? Hard to say. Depends on how bad it was before.
We can all probably improve on the way we make 'constructively critical' replies. In the long run, our goal is for each member to get the best of what they can, even if we word it in a negative manner.
(And this isn't a slam on Danthurs at all, although this is an example).
I strongly believe that Danthurs would have selected different rotors and possibly even different pads if he'd posted it before he bought them. But every member here has an experience and knowledge level different than anyone else. He may have been steered to these components elsewhere, or by his own good experiences on another vehicle, and maybe felt no need to ask advice here.
This is a good example (sorry, but many thanks at the same time to Danthurs) of why it'* a good idea to ask first and gather some collective experience that relates, then go purchase after making your own informed decision based on all inputs.
Are his brakes going to blow up on him? Probably not, but he'* not going to have much luck getting them turned, and his brake performance might not be up to what he COULD have had. Improved or worse? Hard to say. Depends on how bad it was before.
We can all probably improve on the way we make 'constructively critical' replies. In the long run, our goal is for each member to get the best of what they can, even if we word it in a negative manner.
#27
Senior Member
Posts like a Northstar
Join Date: Sep 2006
Location: Dumfries, Virginia Member: #6887
Posts: 577
Likes: 0
Received 0 Likes
on
0 Posts
![whitecrystal1 is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Originally Posted by willwren
he'* not going to have much luck getting them turned, and his brake performance might not be up to what he COULD have had. Improved or worse? Hard to say. Depends on how bad it was before.
As far as improvement, like I said above, they have or seem to have helped my 95 but not the truck. It didn't seem to be any better until I swapped the pads to ceramics. So I would have to say the rotors didn't it help any but they sure do look good
![Laughing](https://www.gmforum.com/gm/images/smilies/icon_lol.gif)
#28
![Default](https://www.gmforum.com/images/icons/icon1.gif)
And once again, I have to reiterate my position here...drilled rotors are not inherently evil. Buy a good brand, make sure the holes are cast in, and you should have no problems.
The main thing is the type of driving you do. If you do a lot of stop and go, then drilled are wonderful. I delivered pizza with my 95 SSEi with PowerStop drilled rotors, and trust me, if I'd had blanks, I would have faded them to useless every run.
Just get used to the idea that you may only get two sets of pads before you have to buy new rotors.
The main thing is the type of driving you do. If you do a lot of stop and go, then drilled are wonderful. I delivered pizza with my 95 SSEi with PowerStop drilled rotors, and trust me, if I'd had blanks, I would have faded them to useless every run.
Just get used to the idea that you may only get two sets of pads before you have to buy new rotors.
#29
Junior Member
Posts like a Ricer Type-R
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Brian, what you said "make sure the holes are cast in" just wiped out 95% of the 'drilled' rotors on the market.
But it still takes away from braking surface area, even though it solves the micro-cracking issue. When going 'cast in', you need to increase the braking area to make up for the loss by increasing the diamter of the rotor.
But I already threw this at Danthurs in another topic. He'* got what he'* got now. I'm passionate about people getting the right stuff, especially with regards to brakes, but it'* a little late now.
The important thing is that our intentions are honorable.
But it still takes away from braking surface area, even though it solves the micro-cracking issue. When going 'cast in', you need to increase the braking area to make up for the loss by increasing the diamter of the rotor.
But I already threw this at Danthurs in another topic. He'* got what he'* got now. I'm passionate about people getting the right stuff, especially with regards to brakes, but it'* a little late now.
The important thing is that our intentions are honorable.
#30
Retired Senior Admin
![](/images/badges/Gearhead.png)
Expert Gearhead
Thread Starter
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 29 Likes
on
25 Posts
![Danthurs is a name known to all](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Danthurs is a name known to all](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Danthurs is a name known to all](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Danthurs is a name known to all](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Danthurs is a name known to all](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Danthurs is a name known to all](https://www.gmforum.com/images/reputation/reputation_highpos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Just to clear it up, my brakes are WAY better now. The car don't shake, and they dont fade like the ones I had on. Infact I was suprised at how fast I stopped.
They may not be the *perfect* setup, but it'* better then what I had. They are on the car, and there they shell stay. If they fail, then I will change them, otherwise it'* just throwing away money.
![Shocked](https://www.gmforum.com/gm/images/smilies/icon_eek.gif)