is there ANY easy way to get to the ps reservoir on a 3.8?
#1
Senior Member
Certified GM nut
Certified GM nut
Thread Starter
is there ANY easy way to get to the ps reservoir on a 3.8?
so on my car its kindof annoying to check the ps level. on laurens, its damn near impossible. that 3.8 being in that engine compartment, i can barley even feel the cap with the tip of my finger. its not whining or anything like that, but id still like to flush it. has anyone with big hands figured it out yet? or should i just lather my arm in soap and shove my hand down there? lol.. thanks alot guys.
#2
Senior Member
Posts like a Northstar
The only thing I could find is this info on how to flush your PS system......hope this helps..
http://gmsi.gc.maricopa.edu:9001/si/...=&cellId=54946
http://gmsi.gc.maricopa.edu:9001/si/...=&cellId=54946
#3
Senior Member
Posts like a Turbo
just lather your arm in soap and shove your hand down there... if you make it elbow deep.. your in too far!
Seriously... with the alt right there.. be careful that your sleeves, or anything are not hanging down as the belt will pull you in if they contact it'* one of the hardest to get too PS
Seriously... with the alt right there.. be careful that your sleeves, or anything are not hanging down as the belt will pull you in if they contact it'* one of the hardest to get too PS
#4
Retired
Hey John, is that like the same things as shoving your arm way down deep inside a cow? I'd post a pic, but its breakfast time for others.
And I just noticed, this was my 10,000th post.
And I just noticed, this was my 10,000th post.
__________________
Retired Administrator
Retired Administrator
#6
Senior Member
Posts like a Supercharger
Join Date: Jan 2013
Location: Enfield, CT
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
You can remove the dog bones and tilt the engine forward a bit. I was able to tip mine forward enough to remove the rear exhast manifold through the top. Removing the crossbar frees up a *^&* ton of space too. To help tip as much as possible i removed the dog bones and placed a jack carefully on the rear lip of the trans and lifted a bit (be very gentle).
#7
Senior Member
Posts like a Supercharger
Join Date: Jan 2013
Location: Enfield, CT
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
#9
BANNED
True Car Nut
I had two customers come in with Impala'* that had the 3800 at the same time, both needing PS fluid. Both engines had been running and were scorching hot. One customer helped the other, and got to it by wrapping his arm in an old shirt to keep from getting burned.
I'm so glad that the 3800 in the Bonne is so much easier to work with, those dogbone mounts are horrible.
I'm so glad that the 3800 in the Bonne is so much easier to work with, those dogbone mounts are horrible.
#10
Senior Member
True Car Nut
I feel your pain, mine is a pain to get to as well, I can just reach it to get the cap off on my 96' PA.
Mike, thanks for reminding me what I seen on The Incredible Dr. Pol last night, he was checking cows to see if they were pregnant, and apparently the best way to tell is to reach way up in the pooper chute.
Mike, thanks for reminding me what I seen on The Incredible Dr. Pol last night, he was checking cows to see if they were pregnant, and apparently the best way to tell is to reach way up in the pooper chute.