Service Engine soon Light
#1
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 1 Like
on
1 Post
Service Engine soon Light
Ahh it came on today as i was driving, i pulled all the plug wires and what not and noticed no prob i reconnecd them and the light remaind on, it doesnt idel perfect but close to it, and it gets about 300 town kms to a tank of gas, i unhooked the battery, then re conneced it and the light stayed off once the car was running, im gunna replace the O2 sensor and fuel filter and see how that helps the idel.
#2
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 1 Like
on
1 Post
i just read another post that is almost just like this one, the person stated that there Traction off light was always on, then the ABS light was always on then the SES light was on.........my cars Traction off, and ABS lights are always on......
#3
Retrieve the codes and tell us what the code numbers are.
http://www.bonnevilleclub.com/techinfo/?article=34
http://www.bonnevilleclub.com/techinfo/?article=34
#4
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 1 Like
on
1 Post
were will it display for example Code 24 will the screen read 24 or is it just a series of flashs?
#5
Originally Posted by SSEimatt93
were will it display for example Code 24 will the screen read 24 or is it just a series of flashs?
#7
www.geocities.com/dann8785
visit my site, then go to tech articles, then "service engine soon." that'll explain how to do it.
visit my site, then go to tech articles, then "service engine soon." that'll explain how to do it.
#8
Junior Member
Posts like a Ricer Type-R
Did you read the article? I should flash a 12 (flash once, pause, flash twice) 3 times total to tell you you're communicating with the PCM. After that, it'll flash each code 3 times. Don't take your eyes off it. It helps to have someone write the codes down as you call them off. That article in Techinfo has most of the codes, or you can just bring it back here.
Thread
Thread Starter
Forum
Replies
Last Post
blaze420711
Pontiac
6
10-19-2014 10:54 PM