Need a pic of 92 L27 w/ EGR
#1
Need a pic of 92 L27 w/ EGR
The title says it all, I just want a picture for reference if anyone has a 92 (L27) with the EGR valve on it. I ask because even though willwren'* description in techinfo is detailed, but I don't understand it, and I dont want anything on my engine to burn .
Link to original article
Link to original article
#2
Look at an underhood pic of the Zilla. You'll see a mushroom looking thing somewhat forward from the throttlebody. That'* the EGR. Same location on a 92 L27 IF it got one (late production).
In general, if you had the magnavox (square) coil and aluminum upper, you likely didn't get an EGR (there was no provision for an EGR inlet on the 92 aluminum upper). It feeds out of the front exhaust manifold just to the right of runner #5 as you face the engine. The EGR bracket is mounted to the driver'* end of the front cylinder head.
In general, if you had the magnavox (square) coil and aluminum upper, you likely didn't get an EGR (there was no provision for an EGR inlet on the 92 aluminum upper). It feeds out of the front exhaust manifold just to the right of runner #5 as you face the engine. The EGR bracket is mounted to the driver'* end of the front cylinder head.
Thread
Thread Starter
Forum
Replies
Last Post
Marik_bathory
Performance, Brainstorming & Tuning
6
03-28-2007 07:59 PM