HELP!! Need to remove tranny sensor! Car fights its self!
#13
![Default](https://www.gmforum.com/images/icons/icon1.gif)
On the 92, high transmission temperatures will shut off the traction control, that'* why it'* there.
Uh oh...
Do a comparison table...
92 - 95
A ?
B C
C ?
D D
E E
F A
G B
In the 92 transmission, the temp sensor is grounded. In the 95 transmission, it is looking for a 5V signal. Also the output from the temp sensor goes to the PCM in the 95, and to the traction control box in the 92.
There is no 12v+ brake switch input on the 95 transmission. It looks to me like the computer has full control of the TCC/VCC Solenoid on the 95, while on the 92 it is controlled by both the brake switch and the computer.
Not sure if this trans will work without more modifications.
Uh oh...
Do a comparison table...
92 - 95
A ?
B C
C ?
D D
E E
F A
G B
In the 92 transmission, the temp sensor is grounded. In the 95 transmission, it is looking for a 5V signal. Also the output from the temp sensor goes to the PCM in the 95, and to the traction control box in the 92.
There is no 12v+ brake switch input on the 95 transmission. It looks to me like the computer has full control of the TCC/VCC Solenoid on the 95, while on the 92 it is controlled by both the brake switch and the computer.
Not sure if this trans will work without more modifications.
#17
Senior Member
True Car Nut
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Originally Posted by Xtrmgtp
Oh well. Thanks guys. Looks like I have to take it back out and swap it for a 92 and a 92 only. :(
Thread
Thread Starter
Forum
Replies
Last Post