GTX turbo build
#174
Retired
#175
Senior Member
He he that sounds very good & healthy (except pulley squeal)
How accurate is that HP cause I think I saw 417 there..
How accurate is that HP cause I think I saw 417 there..
__________________
1997 Buick Pk Ave (Soft Ride) Suspension!
1997 Buick Pk Ave (Soft Ride) Suspension!
#176
Retired Senior Admin
Expert Gearhead
Thread Starter
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 29 Likes
on
25 Posts
The squeal was from the alternator, it seems to be gone now. Not sure on the HP. The app says at the wheels, but you would think I would need to enter information like gear ratio and weight.
#177
Retired
Your right Dan, my ScanXl requires such things as tire diameter, FD ratio, vehicle weight, etc when using the Drag Strip software.
__________________
Retired Administrator
Retired Administrator
#179
Retired Senior Admin
Expert Gearhead
Thread Starter
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 29 Likes
on
25 Posts
The GTX was here again today. There was a clunking going on when turning, starting or stopping. I inspected the sub frame real good, found no cracks. The right side ball joint looked a little loose. I was able to turn the castle nut only 1 and a half flats. I then hit the sub frame bolts with the impact turned all the way up to 150psi. One rear bolt turned about 1 and a half turns, the other turned about half a turn. The fronts moved a little. So far, no clunk. Better stay that way too.
I think he'* about 13 pounds of boost right now.
I think he'* about 13 pounds of boost right now.
Thread
Thread Starter
Forum
Replies
Last Post
Moemar
Performance, Brainstorming & Tuning
3
10-10-2003 12:05 AM