THE FIX. Saving a Canadian car... (update pg2)
#13
Senior Member
True Car Nut
Thread Starter
Join Date: Aug 2005
Posts: 5,798
Likes: 0
Received 0 Likes
on
0 Posts
![Peterg22000 is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Originally Posted by BillBoost37
Looks like a good amount of work Pete. You didn't mention pulling the trans to get better access to the area. At least it looks like you pulled it.
![Wink](https://www.gmforum.com/gm/images/smilies/wink.gif)
#14
DINOSAURUS BOOSTUS
![](/images/badges/Gearhead.png)
Expert Gearhead
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Ok..then are you rebuilding it or something? Because if it'* not for access I'm wondering why you would do the extra work. The subframe is plenty of work by itself.
#15
Senior Member
True Car Nut
Thread Starter
Join Date: Aug 2005
Posts: 5,798
Likes: 0
Received 0 Likes
on
0 Posts
![Peterg22000 is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
rebuild with a shhift kit.
the guy doing it found a few thing that where minor concerns to him. but overal he was surprised I was rebuilding
Guess it was all in my head
still he replaced everything that was even slightly wrong and did the shift kit, so shell be good to go soon
the guy doing it found a few thing that where minor concerns to him. but overal he was surprised I was rebuilding
![Embarassed](https://www.gmforum.com/gm/images/smilies/icon_redface.gif)
still he replaced everything that was even slightly wrong and did the shift kit, so shell be good to go soon
![Wink](https://www.gmforum.com/gm/images/smilies/wink.gif)
#18
![Default](https://www.gmforum.com/images/icons/icon1.gif)
looks good. What would the approximate cost of this be? Also, how much is the tranny rebuild? I may consider having mine done in the near future.
Get some rust converter/POR 15 into that space too to stop it from returning. Also, why not weld a nut to the new holes on the passenger side inorder to hole the bolts. Just incase the sunframe has to come down again.
Get some rust converter/POR 15 into that space too to stop it from returning. Also, why not weld a nut to the new holes on the passenger side inorder to hole the bolts. Just incase the sunframe has to come down again.
#19
DINOSAURUS BOOSTUS
![](/images/badges/Gearhead.png)
Expert Gearhead
![Default](https://www.gmforum.com/images/icons/icon1.gif)
On the nuts. The originals are in a channel that keep them from spinning, this is to give them a little movement in the case that the subframe is removed and moved a little in any direction for fitment.
It seems that Peter could almost weld those in place and when putting the subframe back in..start with those bolts.
It seems that Peter could almost weld those in place and when putting the subframe back in..start with those bolts.
#20
Senior Member
True Car Nut
Thread Starter
Join Date: Aug 2005
Posts: 5,798
Likes: 0
Received 0 Likes
on
0 Posts
![Peterg22000 is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Originally Posted by BillBoost37
On the nuts. The originals are in a channel that keep them from spinning, this is to give them a little movement in the case that the subframe is removed and moved a little in any direction for fitment.
It seems that Peter could almost weld those in place and when putting the subframe back in..start with those bolts.
It seems that Peter could almost weld those in place and when putting the subframe back in..start with those bolts.
as for cost. 90% if being payed off in favours, so I dont know how much it would acctually cost snyone to be fixed... Id estimate the frame repairs would be $5-800+
the trans is costing me 700 + lost labour time painting the guys quarter panels
![Laughing](https://www.gmforum.com/gm/images/smilies/icon_lol.gif)