Evolution Part 2?
#22
DINOSAURUS BOOSTUS
Expert Gearhead
Thread Starter
Had a request for another.. and I decided to do a show and tell.
Clean everything off the maplight plastic
Cut the donor piece out
Cut plastic where it will be transplanted and measure..sand a little..measure and measure.
Tape in place and put some JB Weld on (remove tape before you take picture )
Allow JB Weld to set, flip piece and put JB Weld on top.
Go to sleep and wait for JB weld to cure... to be continued tomorrow.
Clean everything off the maplight plastic
Cut the donor piece out
Cut plastic where it will be transplanted and measure..sand a little..measure and measure.
Tape in place and put some JB Weld on (remove tape before you take picture )
Allow JB Weld to set, flip piece and put JB Weld on top.
Go to sleep and wait for JB weld to cure... to be continued tomorrow.
#23
Senior Member
Posts like a Turbo
Join Date: Oct 2006
Location: Berea (Cleveland) Oh
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
Boy does he work fast.... its only been a few hours since i asked but i checked the last PM is only been a few Mins before he got started...... Lookin good so far
#25
DINOSAURUS BOOSTUS
Expert Gearhead
Thread Starter
Sand for an hour by hand.. yes...an hour. When perfect.. take pics
Spray plastic adhesion promotor and load pics while drying
Edit Post:
Spray with texture coating and post while drying
Edit..(Are you still sleepin?)
Spray first coat of paint (Babble while pics load...duh..I should press the load button huh?)
See what the end result will basically look like before a couple more coats of paint and reassembly.
Next pics will be completed project.
Spray plastic adhesion promotor and load pics while drying
Edit Post:
Spray with texture coating and post while drying
Edit..(Are you still sleepin?)
Spray first coat of paint (Babble while pics load...duh..I should press the load button huh?)
See what the end result will basically look like before a couple more coats of paint and reassembly.
Next pics will be completed project.