Build I'm doing (Four Sixer)
#1
DINOSAURUS BOOSTUS
Expert Gearhead
Thread Starter
Build I'm doing (Four Sixer)
Len is building up his ride. It'* a 98 GTP in "police love me" red.
He'* about to take his stock drivetrain and upgrade a bit. Parts include
S1X cam
S3 Prj heads (with front drilled for L26 mount)
1.8 HS rockers
Titanium retainers
130# Crowe springs
CC HD valve locks
Reusable rocker bolts
Intense pushrods
Meziere EWP
Rollmaster DR timing chain
8 rib SC belt
Bonneville tensioner
Alt relocation bracket (unless I talk him outta it)
Ported LIM
S2 ZZP IC
Gen V ported
3.4 MPS (gonna change to a 2.9 quick)
Frozen boost FMHE
Meziiere IC pump (20 gpm)
60lb injectors
ZZP IC pump controller
LS1 TB
SSAC headers
PRJ fuel rails
Tim King transmission
ATI torque converter
and there'* more I'm forgetting
The piles of parts
Checking it out
Dirty wires
Cleaned wires
Here she is.. (This motor was in my Bonne)
JP Single timing chain that I ran. Considering..this looks good.
Here comes a DR
the money shot (I always take this picture)
GM FSM tells us to use RTV at the bottom of the gasket
And back together
Took the wrap off the transmission and noticed it'll need work before going in. Dinged up axle seal and VSS sensor is broken
Need to order
1/4" NPT plugs
1/2" NPT to 3/4" hose fittings
Washers for IC bolts
LIM Gaskets
Gasket material for IC gaskets (make own)
Metal to mount IC
Rubber to isolate IC pump
Lower conversion gasket set (on hand)
Permatex 26B gasket maker (IC gasket)
GM Pipe sealant with PTFE
He'* about to take his stock drivetrain and upgrade a bit. Parts include
S1X cam
S3 Prj heads (with front drilled for L26 mount)
1.8 HS rockers
Titanium retainers
130# Crowe springs
CC HD valve locks
Reusable rocker bolts
Intense pushrods
Meziere EWP
Rollmaster DR timing chain
8 rib SC belt
Bonneville tensioner
Alt relocation bracket (unless I talk him outta it)
Ported LIM
S2 ZZP IC
Gen V ported
3.4 MPS (gonna change to a 2.9 quick)
Frozen boost FMHE
Meziiere IC pump (20 gpm)
60lb injectors
ZZP IC pump controller
LS1 TB
SSAC headers
PRJ fuel rails
Tim King transmission
ATI torque converter
and there'* more I'm forgetting
The piles of parts
Checking it out
Dirty wires
Cleaned wires
Here she is.. (This motor was in my Bonne)
JP Single timing chain that I ran. Considering..this looks good.
Here comes a DR
the money shot (I always take this picture)
GM FSM tells us to use RTV at the bottom of the gasket
And back together
Took the wrap off the transmission and noticed it'll need work before going in. Dinged up axle seal and VSS sensor is broken
Need to order
1/4" NPT plugs
1/2" NPT to 3/4" hose fittings
Washers for IC bolts
LIM Gaskets
Gasket material for IC gaskets (make own)
Metal to mount IC
Rubber to isolate IC pump
Lower conversion gasket set (on hand)
Permatex 26B gasket maker (IC gasket)
GM Pipe sealant with PTFE
#4
DINOSAURUS BOOSTUS
Expert Gearhead
Thread Starter
It probably got dinged up in shipping.
I don't think gave is the right term on the motor. There was a trade, I traded him a motor, he traded me a pile of green paper.
I don't think gave is the right term on the motor. There was a trade, I traded him a motor, he traded me a pile of green paper.
#5
Senior Member
Certified GM nut
#6
DINOSAURUS BOOSTUS
Expert Gearhead
Thread Starter
I sold it before Christmas.
I replaced it with an invisble motor that doesn't tear ISS reluctors off the drive gears in transmissions. There'* only so much breakage a person can take before they scream "uncle". I said I would give the Bonne one last chance when i built the transmission myself. That trans has a power related issue inside of it and I pulled the drivetrain. No more of that...I'll stick to a mild build in my "stock" Regal thanks.
I replaced it with an invisble motor that doesn't tear ISS reluctors off the drive gears in transmissions. There'* only so much breakage a person can take before they scream "uncle". I said I would give the Bonne one last chance when i built the transmission myself. That trans has a power related issue inside of it and I pulled the drivetrain. No more of that...I'll stick to a mild build in my "stock" Regal thanks.
#8
Administratus Emeritus
Certified Car Nut
I see your reasoning Bill. It'* hard to take an engine to it'* brink of self destruction and use it on the street with any reliability. Best left to track guys and shops selling performance parts. No such thing as Max Power and Reliable. You can't have your cake and eat it too.
So I guess we have to wait for Danthurs now for the next installment of, "What I broke this time" ;-P.
Despite the "fail'*" the Forum owes you both alot of kudo'* for all you have done to prove out what can be done with the 3800, and how to overcome some of the frailties of deep modding.
So I guess we have to wait for Danthurs now for the next installment of, "What I broke this time" ;-P.
Despite the "fail'*" the Forum owes you both alot of kudo'* for all you have done to prove out what can be done with the 3800, and how to overcome some of the frailties of deep modding.
#9
DINOSAURUS BOOSTUS
Expert Gearhead
Thread Starter
You hit something on the head there John. The motor was always and has always been rock solid for me. My first..I goofed on the engine stand, second was junk when I got it, this block was the third and a good motor. My issue has always been the transmissions. Sure they are built up and built to take punishment, yet the daily and constant pummelling I gave mine proved out only one thing.. that I had this crazy abilty to rip input shaft sensor reluctor wheels off the drive gear. I've only heard of one other person with that uncanny ability and one day maybe we'll have a couple of beers over that one. It'* a simple little wheel that goes around in front of a sensor, I trashed three channel plates in the process, tore 5 or so of them off the drive gears. It'* unheard of in the 3800 community. Yet my build wasn't the biggest, baddest or most powerful out there. I'm kinda thinking that my right foot was/is a mean character.
#10
Okie Hokie
Posts like a Camaro
Join Date: Dec 2008
Location: Durant, Ok 74701
Posts: 1,107
Likes: 0
Received 0 Likes
on
0 Posts
You know Im bored when I find my way back home to see whats kickin on the dark side...
That will be one mean GTP... and is that a Gen V or a nicely bored and powdercoated Gen III SC on the table?
btw I feel for that tranny going in with the history behind your beastly motor... hope you gave the guy the 411 on the number of trannies that engine has destroyed
<epic... your engine to transmissions
That will be one mean GTP... and is that a Gen V or a nicely bored and powdercoated Gen III SC on the table?
btw I feel for that tranny going in with the history behind your beastly motor... hope you gave the guy the 411 on the number of trannies that engine has destroyed
<epic... your engine to transmissions