1991 SSEI Project
#22
Senior Member
True Car Nut
Join Date: Sep 2006
Location: Indianapolis, IN
Posts: 4,606
Likes: 0
Received 0 Likes
on
0 Posts
Wow, a 454'* throttle body is similar to the Series 1 L67'* TB? At least the bolt pattern and the bore... Could you please post some pictures when you have the time?
#23
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Nov 2008
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
#24
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Nov 2008
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Update,I have installed the wiring on to the engine and put it through the firewall. The wiring is still not finished I dont have an air bag or HUD so I know this wiring is useless This will end up being the hardest part of this project. The feul lines are in a different form 91 has metal lines and 92 has plastic I will have to have them made up at the house of hose. the axles have abs differences and one is longer then the other. positive wire to the alt. is to short also no biggy.
#25
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Nov 2008
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
UPDATE:Gas lines are done and installed,axles are in,fuel filter, trans filter and gasket done. Had to get a trans cooler to match this setup (done).Power steering cooler lines converted over.Have my dash completely pulled out in order to do the wiring. My best guess is that I'll have to trace every wire to it'* origin to make it work.I'am also going to gut the air box.I'am a bit cunfused with the TCC wiring the original has 5 wires and the new one has 7.??? But all and all guys so far very straight forward conversion.Attachment 1089
#26
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Nov 2008
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Well the car still sits in the garage unable to move under it'* own power . The wiring is the most time consuming for me. I have spark it will turn over (BUT) no fuel the pass-key2 fuel disable works well. I have no pass key 2 in a 1991. This is the only thing between me and starting the car now. ????? Has anyone ever wired around the pass key2 module?THX
Thread
Thread Starter
Forum
Replies
Last Post
ha'larry'us
Everything Electrical & Electronic
1
06-04-2010 08:00 AM
jshelton54
Performance, Brainstorming & Tuning
11
02-28-2008 07:21 PM